Panorama and Firewall Communication

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Panorama and Firewall Communication

L2 Linker

Dear All, 

 

I have Panorama hosted in one of the location [where geo graphically separated] abd my Managed firewall are located across the globe. Due to Embargoed few countries I don't have  option to establish S2S VPN or any other over lay. So I have left with option plain internet. 

Question1: What are the communication I could expect from Panorama inbound and Outbound from/to Managed firewalls. 

Question 2: Is there no inbound inbound connection from Managed firewalls to Panorama?

Question 3: From my Panorama hosted sites If do address translation [ NAT] Panorama Private IP address to Public IP address, then  I shall register managed firewalls with Panorama hosted location Public IP address. 

 

Regards,

Ram

 

 

1 REPLY 1

Cyber Elite
Cyber Elite

Hi @Ramakrishnan ,

 

Communication between Panorama and managed device is always initiated by the NGFW.  The primary communication will be  over tcp/3978.  https://docs.paloaltonetworks.com/pan-os/10-1/pan-os-admin/firewall-administration/reference-port-nu...

 

You need to use the public IP address of Panorama so the NGFW can initially connect.  In addition to the NAT, the public IP address for Panorama should be configured under Panorama > Setup > Interfaces > Management > Public IP Address.

 

I would configure the NGFW to use the public interface for Panorama and Panorama Log Forwarding under Device > Setup > Services > Service Route Configuration so there is less chance any NGFW changes would break the connection.  And you should enable automated commit recovery.

 

Thanks,

 

Tom

 

 

Help the community: Like helpful comments and mark solutions.
  • 428 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!