Panorama template limitations

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Panorama template limitations

L3 Networker

Hi Folks,

 

We had recently migrated HA Firewall pair to Panorama.

 

We had observed that after migration the HA Settings (HA peer IP address, device ID, etc), Management IP address are over-ridden locally on the firewall. 

 

I had gone through an documentation stating the limitation of templates. There it is mentioned as 

  • Configure the IP addresses of firewalls in an HA pair.

I am not able to understand the exact meaning of the above statement whether it is the HA IP addresses configured under HA settings or all the system specific IP addresses which differs b/n Active Passive pair such as HA IP address, Management IP address, Gateway IP address given for Management interface that have limitation with regards to the template

 

https://docs.paloaltonetworks.com/panorama/9-1/panorama-admin/manage-firewalls/manage-templates-and-...

 

Thanks in advance

1 REPLY 1

L6 Presenter
  • 1583 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!