Validation error while pushing config in panorama

[AinulSafiah]

Previously, we had perform upgrade activity on the PA-5220 from version 9.1.14-h1 to version 10.1.11. After few days we try to make some changes and push from panorama. Then we encounter this error(kindly refer the attached image):

deviceconfig->system->update-schedule->wildfire->recurring->sync-to-peer unexpected here

deviceconfig->system->update-schedule->wildfire->recurring is invalid

Commit failed

Hope to hear from you expert if there is a way to fix this 😞

[reaper]

try setting the wildfire dynamic update schedule to 15 minutes, push commit, then set it to live and push commit, see if that helps

[NoLatency]

Which Panorama Version are you using?

[D_Milojevic]

I had the same issue and corrected it with following commands:

FriendlyAdmin@FIREWALL# delete deviceconfig system update-schedule wildfire recurring

[edit]
FriendlyAdmin@FIREWALL# commit

Commit job 7495 is in progress. Use Ctrl+C to return to command prompt
..................55%.98%....................100%
Performing panorama connectivity check (attempt 1 of 1)
Panorama connectivity check was successful for 1.1.1.1
Configuration committed successfully

[edit]
FriendlyAdmin@FIREWALL#

Then attempt template and config push from Panorama and all went to green.

HTH