02-17-2022 10:33 AM
We have some new PA-440's are are trying to work through the ZTP process. We have ZTP configured, and the devices are registered. We now see them as connected to our Panorama server, but we are unsure of the next step.
We can't seem to make some changes to do the devices as they are still in ZTP mode, but the documentation to turn ZTP off is to do this from a console connection. Doesn't that defeat the purpose of ZTP?
I am just confused on how we make the jump from a ZTP device, to a fully managed device in Panorama.
12-18-2023 09:18 AM
Until the ZTP FW gets a successful config push from Panorama the ZTP process on the FW will prevent local configuration from happening. (show system ztp status) Once the FW gets a successful push from panorama this ZTP process will complete and then local configuration can take place.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
