- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Hello to All,
After reading much about this I am starting to think that internal routing between the Prisma Access tenants is not possible and the traffic should be send with Traffic Steering to a router that is on-prem and connected to the two tenants or use use a dedicated service connection with the traffic stearing but then the two tenants will talk with one another through the external Prisma Access public Ip addresses and not the internal ones.
I could be wrong but this seems the only way but this is a little limiting as for example to stop SIP ALG function of the SIP application is done with per device group and for a prisma access only one device group is used so this can't be stopped for a just single Remote Network connection.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!