Internet1 interface not coming up after enabling bypass pair on ION 3000

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Internet1 interface not coming up after enabling bypass pair on ION 3000

L0 Member

I have Two ION-3000 in HA. The internet1 interface on first ION3000 is not coming up and there is no light on it. However, the same Internet1 bypass pair through ION-2 where it's working fine.

Need to find out what is wrong with first ION3000 internet1 interface. It works fine when we breakdown/decoupled the bypass pair into single internet1 port.


L2 Linker

Hi @rushwag 

Please check if the site is in disabled/analytics mode. The bypass pair will not work in those modes.  You need the site in control mode to get those bypass pairs working. 

Hello Kn,


it is in control mode.

L2 Linker

Can you please help me with the output for the below commands?
# dump overview 

# dump interface status all

#file tailf log elem-mgr


Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!