Authentication failure for user even with correct credentials and MFA response was supplied. ITATS528E Authentication failure for user <user> from station: <IP Address> (code: -77).

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Authentication failure for user even with correct credentials and MFA response was supplied. ITATS528E Authentication failure for user <user> from station: <IP Address> (code: -77).

L0 Member

Hi,

 

We have a user who is unable to access PVWA. we have radius configured for MFA. The authentication fails after user types in the challenge response.

 

CyberArk mentioned that they see the below error:

ITATS528E Authentication failure for user <user> from station: <IP Address> (code: -77).

 

This seems to be only with few users while other including myself can access without any issue.

 

What could be the cause for it? Can someone please share your insights on this?

1 accepted solution

Accepted Solutions

L4 Transporter

@Sreeram Yogeshwar​ hi, Time-based codes might be out of sync. have you tried to Resync the token for users having the issue ?

 

Further you can refer to radius logs for more details.

View solution in original post

4 REPLIES 4

L6 Presenter

Do you see anything in the RADIUS logs?

 

https://community.cyberark.com/s/article/KI00013079 - previously this error was seen in the ITA log even though the users successfully logged in and this seems to be resolved but if your users aren't able to log in, might be worth checking your RADIUS logs as well

L4 Transporter

@Sreeram Yogeshwar​ hi, Time-based codes might be out of sync. have you tried to Resync the token for users having the issue ?

 

Further you can refer to radius logs for more details.

L4 Transporter

Hi @Sreeram Yogeshwar​ 

 

It seems that the community is asking questions to understand your question better, but we haven't seen a response yet.

If you've already received an answer, we'd appreciate it if you could share the solution to help other community members with similar questions.

If not, we encourage you to answer the questions that have been asked so that the community can assist you.

 

Thank you for your attention, Liad

L0 Member

Thank you for the inputs, the issue was with Authenticator app, and it seemed they were out of sync. We had the user change the authentication to 'text the code' and then test which worked. We therefore reconfigure the MFA and authentication was successful.

 

We can mark this as a solution for this. Appreciate all the help!

  • 1 accepted solution
  • 294 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!