- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.
09-14-2021 04:56 PM
We are just now onboarding CyberArk and are trying to figure out how to load balance the PSM servers. We have three locations that we would like to deploy PSM's and we would like to point to one DNS name which based on the IP subnet that you are connecting from will direct you to the local PSM unless that is down then direct you to the next hop. We are not sure how to achieve this without proxying the traffic through a load balancer which would cause a lot of latency for the folks in other countries. Has anyone done this before? What product did you use? DNS based load balancing seems to be what we want to do as long as the product can actually monitor the servers to determine that they are operating properly but we have not been able to find a product that does this.
09-15-2021 01:39 AM
Hello Joe,
What you describe exists and it's called GSLB with geolocation.
You will find a lot of information on this load balancing method.
I know that for example F5 big-ip can perform such tasks.
You have to be vigiliant regarding the persistence and caching for your clients to ensure they re-request the DNS often.
I find it particulary relevant when load balancing Cyberark component because the client talks directly to the Cyberark module and so the traffic is not proxified, it's a lot more convenient for debugging for example, and to perform for example IP Source authentication for CCP.
For the load balacing i've developped a windows service that perform some tasks on the local server (connectivity to the vault, disk usage, service status) and open a local port on the server if all is OK.
That way you can control easily which servers are on the pool and you can decide to remove one server for upgrade for example. In addition it's a lot more clever that the standard load balacing that only check the rdp port for example.
I know this is a quick answer i hope it'll help you, if you need further details feel free to ask.
09-15-2021 01:44 PM
This might help:
https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/Latest/en/Content/PSM/psm_healthcheck.htm
https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/Latest/en/Content/PAS%20INST/Installing-PSM-in-a-Load-Balancing-Environment.htm?Highlight=PSM%20load%20balaceing
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

