How to upgrade PSM for SSH

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to upgrade PSM for SSH

L3 Networker

It would seem the documentation has not really improved fr upgrades and is somewhat confusing in its layout and the way it references the initial install docs which contain potentially irrelevant info.

 

Please can someone redo the docs for those less skilled whose day job is not wholly CyberArk or even Linux and have all the relevant steps in one place with explicit instructions rather vague references to actions required.

 

Specifically for me it would seem I need to have a copy of psmpparms that is the same as the one used during the original install, if I had known I would have kept a copy of it (install was done by CyberArk engineer) but was not told so it is gone and I have recreate this, but have no idea what was in it.

 

"Make sure that the psmpparms configuration file contains all the required parameters. For details, see Create the PSM for SSH parameters file ."

 

What is the basic info I need to put in this to upgrade? If I don't uncomment anything will it just stay the same and really the fill just needs to exist?

Can I get the current info from a file somewhere or run a command to get this?

6 REPLIES 6

L7 Applicator

https://docs.cyberark.com/ispss-deployment/latest/en/content/privilege%20cloud/privcloud-upgrade-psm-ssh.htm

 

https://docs.cyberark.com/privilege-cloud-standard/Latest/en/Content/privilege%20cloud/privcloud-prerequ-psm-ssh.htm

 

I hit the wrong button and was answering my own question.

thanks for the speedy reply but those docs are insufficient

 

L6 Presenter

It would be remiss of me to not mention that if this is a major version upgrade, it's recommended that you utilize CyberArk or Professional Services to get the upgrade done as CyberArk may not support in case of issues otherwise. Major version upgrades would entail something like 12.x to 13.x or 13.x to 14.x.

 

Just to clarify, did you manually remove / delete the psmpparms file post-installation? I'm not sure if the configuration is saved elsewhere post installation, you can maybe try to run a grep to match psmpparms across your file system. The document Robert shared does have the parameters that are needed in psmpparms for you to go ahead with installations / upgrades. Check point 3 in this section - https://docs.cyberark.com/ispss-deployment/latest/en/content/privilege%20cloud/privcloud-prerequ-psm-ssh.htm#CreatethePSMforSSHparametersfile

Most of them will take on default values but it depends on your environment. You could also check with the CyberArk engineer who worked with you for the install if that's possible.

 

InstallationFolder - Check where your psmp is installed and enter the same path

InstallCyberArkSSHD - If you see both the install rpm file and 'infra' rpm file, the value will most likely be Integrated

AcceptCyberArkEULA - value should be Yes

Hardening - value should be Yes to perform hardening

 

I hope this helps!

L4 Transporter

You dont need original psmparms file . The simple trick to this follow the installation procedure of the PSMP and create psmpparms file and place it under /var/tmp . when you are ready to jump pass the upgrade flag into RPM instead of install.

rpm -U <cark.XXX.rpm>

L4 Transporter

You dont need original psmparms file . The simple trick to this follow the installation procedure of the PSMP and create psmpparms file and place it under /var/tmp . when you are ready to jump pass the upgrade flag into RPM instead of install.

rpm -U <cark.XXX.rpm>

L3 Networker

I found this KB article

https://community.cyberark.com/s/article/Privilege-Cloud-Install-Upgrade-PSMP

This gets you to use a script from the Privilege Cloud Tools bundle called psmpwizXXXX.sh which manages install, upgrade and repair

Update took about 2 minutes.

This is vastly simpler and should be part of the actual download, it would seem even when CyberArk can make your life simple, they make it hard to find.

  • 146 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!