Installing Non-Domain Joined (WORKGROUP) Connector Server [PSM & CPM]

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Installing Non-Domain Joined (WORKGROUP) Connector Server [PSM & CPM]

L4 Transporter

Hi Team,

As per below article, we can install PSM on a WORKGROUP computer and make connections to WORKGROUP Servers.

https://community.cyberark.com/s/article/How-to-Install-Non-Domain-Joined-WORKGROUP-PSM-on-Server-20...

 

Scenario: Company X has a Prod Domain and a DMZ Domain too. Some of the DMZ Servers are domain joined and some are not.

For Prod Domain, we got domain joined Connector Servers.

We are planning to install separate WorkGroup Connector Server(CPM & PSM) for DMZ.

 

Question1: Can we connect to DMZ Domain joined Servers and WorkGroup servers from WorkGroup PSMs ? If Yes,any CyberArk article around ?

Question2: Will WorkGroup CPM be able to rotate the credentials of WorkGroup & DMZ Domain Target serves ?

6 REPLIES 6

L6 Presenter

In general, what you are asking about is all possible but depends on your network connectivity.

 

For PSM connectivity, you can connect to external domains as long as you meet the connectivity requirements detailed here: https://docs.cyberark.com/pam-self-hosted/latest/en/content/pas%20sysreq/system%20requirements%20-%20psm.htm?tocpath=Installation%7CSystem%20Requirements%7CSystem%20Requirements%20by%20Product%7C_____7

 

For CPM connectivity, you can rotate credentials in external domains as long as you meet the connectivity requirements detailed here: https://docs.cyberark.com/pam-self-hosted/latest/en/content/pas%20sysreq/standard%20ports%20-%20cpm.htm

 

Quick example: Open port 3389 from the PSM server to the DMZ network to allow RDP connectivity to DMZ domain-joined target systems. For CPM activities, other ports are required to be open but external DMZ domain can be managed in the same way.

L5 Sessionator

As a side note, you must also consider RDS licensing, as only Per Device CALs can be used in a Workgroup environment

and the RDS license server has to be in the same workgroup

L4 Transporter

Hi @Amit Maharana​ 

 

Since several community members answered your question, Could you kindly let us know if any of these solutions addressed your query?

If so, it would be great if you could mark the most helpful response as 'Select as Best' to assist other community members who may encounter a similar issue.

 

Thank you, Liad.

I could not test it due to some blockers. Will confirm back once I could fix it.

Thank you @Amit Maharana​ .

Waiting for your insights. 😀

  • 242 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!