Is two CPM servers using the same CPM name okay?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Is two CPM servers using the same CPM name okay?

L2 Linker

I would like to install two CPMs on two VMs. One is active and one is passive. I would like to use the same CPM name for both CPM.

 

Is it okay? Is there any side effect?

 

1 accepted solution

Accepted Solutions

L4 Transporter

You cannot have two CPMs running in parallel with the same name. You can absolutely have as many as CPMs that is allowed as per your license but the CPM user names must be Unique. Like others have already suggested , if you want to retain the CPM with same names so that you dont have to change the safes members, then your option is to use a cold standby CPM. Which again will need a credential file when turning the services back on

View solution in original post

11 REPLIES 11

L7 Applicator

You build a DR CPM server and it is shut down and a procedure takes place to promote it. Follow the process here:

​

For cloud:

https://docs.cyberark.com/privilege-cloud-standard/latest/en/content/pas%20inst/cpm-dr-overview.htm

​

For on prem :

https://docs.cyberark.com/pam-self-hosted/latest/en/content/pas%20inst/cpm-dr-overview.htm

Hello @Malcolm Murray​ Thanks for the answer.

But when we install CPM for Primary and DR, it asks for CPM Application ID I inserted the screenshot from documentation. I would like to know if it is okay that I used the same CPM application ID for both Primary and DR.

Field_Content_versions_oct20__068Ht00000Vf6kBIAR.png

L4 Transporter

Hi Mal

 

Where you have selected Passive from within Connector Manager, you can leave the default value.

 

Connector Manager will still install the CPM Service but will not register your assigned passive server, this is in a way only become active when you perform a fail over from Active to Passive via the required steps.

 

Thanks

 

Michael

Yes, you need to use same Application ID for Primary and DR. As in Step 11 its already mentioned as Passive, This node will active as passive until you switch over manually.

L3 Networker

@kyisoe.thin  For passive CPM, do not register with vault. In that case you can use same CPM user (normally PasswordManager). If you need to activate the passive CPM, then you need to ensure Primary CPM services are down.

 

You may refer to the below article for active passive CPM configurations. I hope this will help you.

 

https://community.cyberark.com/s/article/00003980

L3 Networker

@kyisoe.thin  For passive CPM, do not register with vault. In that case you can use same CPM user (normally PasswordManager). If you need to activate the passive CPM, then you need to ensure Primary CPM services are down.

 

You may refer to the below article for active passive CPM configurations. I hope this will help you.

 

https://community.cyberark.com/s/article/00003980

L7 Applicator

Hi @Kyi Soe Thin​ 

 

The best practice is to not to have two CPMs running in parallel to avoid split-brain scenario.

 

To avoid the split-brain scenario, only one CPM is required to be running. In case of primary CPM fails, activate the DR CPM by running Cred file but using the same CPM internal account.

 

Hope it helps!

L2 Linker

Thanks a lot for all answers.

As far as I tested out, there is no difference between using the same name and different name for Primary and DR CPMs.

 

Please let us know if anyone has different thoughts..

L4 Transporter

You cannot have two CPMs running in parallel with the same name. You can absolutely have as many as CPMs that is allowed as per your license but the CPM user names must be Unique. Like others have already suggested , if you want to retain the CPM with same names so that you dont have to change the safes members, then your option is to use a cold standby CPM. Which again will need a credential file when turning the services back on

L4 Transporter

Hi @Kyi Soe Thin​ 

 

Since several community members answered your question, Could you kindly let us know if any of these solutions addressed your query?

If so, it would be great if you could mark the most helpful response as 'Select as Best' to assist other community members who may encounter a similar issue.

 

Thank you, Liad.

Yeah, you are correct. We cannot use the same CPM name for two Primary CPMs. But we can use the same CPM name for Primary and DR CPMs.

  • 1 accepted solution
  • 425 Views
  • 11 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!