PSM Installation fails - VaultOperationsTesterSafe Validation Failure

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PSM Installation fails - VaultOperationsTesterSafe Validation Failure

L2 Linker

Hi Team,

We are facing an issue while installing the PSM component from the UI on an on-premises hosted CyberArk Environment.

During installation, we receive the following error:

Here is the screenshot for reference:

Field_Content_versions_oct20__068Vy00001ZJFWaIAP.pngError #1: Failed to initialize the PVConfiguration file. Reason: PSMCE030E Failed to initialize PVConfiguration file Check the log to resolve the error(s) and then click Reinstall.

Additionally, while running the prerequisites script, we see the following:

CASVM006E Vault [Demo Vault] does not exist. ITAPE267E Receive object failed (code = 9,0) (Vault [Demo Vault] safe [VaultOperationsTesterSafe] user [[email protected]])

I/O error occurred while opening XML file.

Observations:

Connectivity to the vault seems successful.

The issue occurs during safe/object validation.

Same setup with the same CPM/installer account works on another server.

Environment:

CyberArk Version: 14.9

OS Version: Windows server 2022

Deployment type: Privilege Cloud

 

Has anyone faced this issue before? Could this be related to an incorrect vault name, tenant mapping, or installer permissions?

Thanks.

8 REPLIES 8

L6 Presenter

Did the Casos.error.log file outlined in the script output have any additional information? that should tell you more and where exactly it is failing.

 

Outside of that, are all the other steps passing before the connection test?

 

Does the installer user have any symbols? try to keep it simple - alphanumeric with both cases

 

You can also check to see if there are any packet drops / blocks at the FW level.

L4 Transporter

Hi @Jagadeshwar Reddy Sudha​,

 

Make sure you have added the connector server's public IP into the allowed IPs list of the Privilege Cloud.

 

Also, in the above prerequisites error, I see the username as [email protected]

Installeruser ID needs to be ended with numbers. Check on that as well.

L2 Linker

hi @Uditha Arunasiri​ 

 

The connector server’s public IP has already been added to the allowed IPs list in Privilege Cloud.

Regarding the installer user shown in the prerequisites error, the actual installer user ID does end with numbers as required. The numbers were redacted when sharing the error message for reference.

 

Please let me know if there is anything else you would like us to verify.

Hi @Tanishq Pandey​ ,

Please find the Casos.error.log details pasted below for your review.

 

[24/06/2026 | 11:03:40.636312] | {pid=21284} | {tid=   16056} | class CCASVaultMgr *               | Caso\(344)                                                  | :: | CASVM006E Vault [Demo Vault] does not exist.

[24/06/2026 | 11:03:42.916102] | {pid=21284} | {tid=   16056} | class CCASPASVCExecuter *          | Caso\PASVCExecuters\CCASPASVCExecuter.cpp(438)              | :: | ITAPE267E Receive object failed (code = 9, 0) (Vault [Demo Vault] safe [VaultOperationsTesterSafe] user [[email protected]])

 

To answer your questions:

  • All prerequisite steps are passing successfully before the connection test stage.
  • The installer user does not contain any symbols; it is a simple alphanumeric username and should be fine as per the requirement.
  • We also checked at the firewall level, and there were no blocks observed.

Please review the log details and let us know where exactly the failure might be occurring. Also, kindly advise if there are any additional checks or troubleshooting steps we should perform from our end.

Hi,

 

I suggest proceeding with the standard installation using the downloaded setup instead of using the Connector Management Agent.

However, if the Connector management agent successfully installed, the PSM component will be visible on the tenant even with setup-based installation.

hi

we tried standard installation using setup file however it also fails at a step where PSM installation attempts to create the vault environment.

L0 Member

Can you verify the installeruser password using -Troubleshooting in Prerequisite script. Also check the Pre-requsite script has passed all the checks.

L2 Linker

Hi @Arun Kumar​ 

The installer user password is fine and also the pre-requisite script has passed all the checks.

  • 84 Views
  • 8 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!