PSM Web Application error injectPortBlockToProcess after updating PSMs to version 15

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

PSM Web Application error injectPortBlockToProcess after updating PSMs to version 15

L1 Bithead

Hello folks, we've recently encountered the following problem after updating our PSMs to version 15 from 14.9:

 

PSMDU001I PSM Dispatcher Utils exception occurred. PSMDU051E DLLInjector error, exited with code: 1. (Codes: -1, -1)

 

PSMDU015E Error performing process hook [HookPortBlockToProcess]. Reason: PSMDU051E DLLInjector error, exited with code: 1.

 versionIds_oct20__068Vy00001uPUYXIA4.png 

ClientDispatcher.log of the PSM Web session through MS Edge pictured above.

 

The issues occurs when any web session is stablished via Edge or Chrome, RDP and SSH/Putty sessions are working as expected. We've already checked that the web browser and respective webdrivers have the same version, with either {PSMComponentsFolder} and {PSMComponentsFolder32} at the connection component level returning the same error. For reference, we only use 32bit browsers and the /x64 folder contains the same msedgedriver as /components.

 

We've also tried with AppLocker set to Audit, updating C++ Redistributable to the latest version, and even uninstalling and installing the C++ attached on the prerequisites of the last PSM upgrade.

 

Only one of our connector pools seems affected by the issue, and all of them were upgraded at the same time.

 

Recommendations from PSM Web application shows injectPortBlockToProcess error have been followed, and procmon examination has not found any failed DLL operations as pictured on the above post.

 

We were wondering if anyone as encountered this issue, and what steps did need to be taken to fix it, preferably without repairing the PSM installation.

 

Any help would be tremendously appreciated.

1 accepted solution

Accepted Solutions

Hello all,

I was getting this same issue.

I opened a case with CA and they provided me with the new DLL's that need to be updated in the component folders. then re-run the app locker script.

Please note I upgraded the PSM from 14.9 to 15.0.3 via the connector portal.

This has fixed this issue.

 

Thanks

Shanil

 

View solution in original post

4 REPLIES 4

L4 Transporter

Hello,

Maybe procmon can help find the problem per this reference - PSM Web application shows injectPortBlockToProcess error

Hello all,

I was getting this same issue.

I opened a case with CA and they provided me with the new DLL's that need to be updated in the component folders. then re-run the app locker script.

Please note I upgraded the PSM from 14.9 to 15.0.3 via the connector portal.

This has fixed this issue.

 

Thanks

Shanil

 

Hello,

 

We used procmon but all of the DLLs involved with C++ were loading fine. We did find an event ID 257 on Event Viewer from source PSMDispatcherUtillsDLLInjector detailing DLLInjector: Corrupted library identified, we suspect that it might be one of CyberArk's own DLLs.

Hello,

 

We were suspecting the same thing, as we did find an event ID 257 on Event Viewer from source PSMDispatcherUtillsDLLInjector detailing DLLInjector: Corrupted library identified, at the same time the web connections failed.

We'll open a case and see if the new DLLs fixes it.

 

Thanks for your help!

  • 1 accepted solution
  • 89 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!