Static Firewall Configuration for Privilege Cloud - Are CloudFront/EC2 IP Ranges Required in Addition to FQDNs?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Static Firewall Configuration for Privilege Cloud - Are CloudFront/EC2 IP Ranges Required in Addition to FQDNs?

L0 Member

We are deploying Privilege Cloud (SaaS) for a customer whose firewall performs SSL inspection and cannot allowlist wildcard domains. We are following the static configuration guide here: https://docs.cyberark.com/setup/latest/en/content/ispss-deployment/deployment/deploy-outbound-traffi...

 

For the AWS SSL section, we have extracted the specific OCSP Responder, CA Issuer, and CRL FQDNs from our tenant's certificate chain (6 FQDNs total from the *.cyberark.cloud certificate hierarchy). Since these endpoints operate over HTTP (port 80), they do not require SSL inspection bypass - just allowlisting.

 

However, the Privilege Cloud section of the same doc also references CloudFront and EC2 IP ranges for us-east-1. When we filter ip-ranges.amazonaws.com/ip-ranges.json for CloudFront + EC2 in us-east-1, we get 500+ IP ranges.

 

Our questions:

  1. Are the CloudFront/EC2 IP ranges required in addition to the FQDNs already listed in the static config table, or are they an alternative to the wildcard *.amazonaws.com?
  2. Has anyone successfully deployed Privilege Cloud with a static firewall config without opening 500+ IP ranges?
  3. Is there a published FQDN list for these Privilege Cloud services rather than IP ranges?
  4. For the CloudFront/EC2 IP ranges associated with Privilege Cloud service endpoints (port 443/HTTPS) - do these also need to be on the "do not decrypt" / SSL inspection bypass list on the firewall, in addition to being allowlisted? Or is allowlisting the IPs/FQDNs sufficient without bypassing SSL inspection for those ranges?

 

Any guidance from the community would be greatly appreciated.

1 REPLY 1

L4 Transporter

Hi @Madhav Bhasin​,

 

Looks like you are going through the hard way for static configuration.

 

Open a support ticket with Idira asking the static IP list for your tenant.

  • 22 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!