We have configured privilege cloud architecture in client environment where vault and privilege cloud portal is maintain by cyberark and connector servers which include psm and cpm is installed and configured in on-premises. now client want to migrate.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

We have configured privilege cloud architecture in client environment where vault and privilege cloud portal is maintain by cyberark and connector servers which include psm and cpm is installed and configured in on-premises. now client want to migrate.

L1 Bithead

Now client want to migrate this four connector servers into different network where ip of the machine will going to change but hostname will be same as it is.

So what was the prerequisites that need to be done before and after the migration? what is the correct process of migration? previously configure certification work will need to change or not because hostname will be same just ip will going to change?

1 accepted solution

Accepted Solutions

L7 Applicator

Hi @Deependra Pardeshi​ 

 

Here are my thoughts.

 

Pre-requisites:

 

  • Please take a backup of all important configuration files from Connector servers
  • Please review your configuration and validate in case you have hardcodes the Connector IPs anywhere. One area is in the PVWA ‘Options’ page under PSM section, and against each installed PSMs
  • Network:Also ensure the new IPs are preferably from the same VLAN or if not, the new IPs are configured from the Network / Firewall exactly similar to your existing IPs.
  • Network: Ensure the new Connector IPs are allowed to be connected to target hosts and Infrastructure services (AD, Monitoring tools and any other services you might be using) via Firewall
  • Validate the DNS entries and Hostfile in case you have had any static IP entries
  • Certificate: Validate the certificate properties to validate whether you have specified the IP address under ‘Subject Alternative Name’

 

Migration:

 

  • Prepare the migration plan to change the IP address on Connector servers.
  • Please consider the availability of the environment while changing the IP. If you have multiple Connector servers, I would recommend to take out each PSM, CPM and PSMP out of the Load Balancer farm, change the IP on those hosts first, and validate the functionality by each components before changing the IPs on all components.
  • Validate the migration plan first in the test environment to ensure the approach works as expected
  • Perform the functionality tests for the Use cases (managed by PSM, CPM and PSMP)
  • Resolve the issue which might come a result from the test environment
  • Repeat the approach in other non-production environments and then plan to perform the same in production.

 

 

Please consult with CyberArk beforehand.

 

Hope it helps!

View solution in original post

2 REPLIES 2

L7 Applicator

Hi @Deependra Pardeshi​ 

 

Here are my thoughts.

 

Pre-requisites:

 

  • Please take a backup of all important configuration files from Connector servers
  • Please review your configuration and validate in case you have hardcodes the Connector IPs anywhere. One area is in the PVWA ‘Options’ page under PSM section, and against each installed PSMs
  • Network:Also ensure the new IPs are preferably from the same VLAN or if not, the new IPs are configured from the Network / Firewall exactly similar to your existing IPs.
  • Network: Ensure the new Connector IPs are allowed to be connected to target hosts and Infrastructure services (AD, Monitoring tools and any other services you might be using) via Firewall
  • Validate the DNS entries and Hostfile in case you have had any static IP entries
  • Certificate: Validate the certificate properties to validate whether you have specified the IP address under ‘Subject Alternative Name’

 

Migration:

 

  • Prepare the migration plan to change the IP address on Connector servers.
  • Please consider the availability of the environment while changing the IP. If you have multiple Connector servers, I would recommend to take out each PSM, CPM and PSMP out of the Load Balancer farm, change the IP on those hosts first, and validate the functionality by each components before changing the IPs on all components.
  • Validate the migration plan first in the test environment to ensure the approach works as expected
  • Perform the functionality tests for the Use cases (managed by PSM, CPM and PSMP)
  • Resolve the issue which might come a result from the test environment
  • Repeat the approach in other non-production environments and then plan to perform the same in production.

 

 

Please consult with CyberArk beforehand.

 

Hope it helps!

Thank You Malhar for your response.

  • 1 accepted solution
  • 39 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!