cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Who Me Too'd this topic

Panorama Managed Devices names missing in HA peer, and show as disconnected when they're not!

L1 Bithead

Hi,

 

I'm using Panorama 8.1.13 to manage 60 or so firewalls. Mostly PA-220s with a few PA-5220. These firewalls are in a number of templated device groups.

 

Both Panoramas are M100 appliances. The Managed Devices are correct on the primary Pano. The Device Names and Serial Numbers are correct, and they are in the correct device groups.

My problem is with the HA peer. The managed devices on the secondary peer show some of the PA-5220s names are missing. The name is shown as the serial number. These firewalls or virtual systems are shown as disconnected, but on the primary, they are not disconnected.

 

Do I need to change the HA to the secondary, delete the firewalls that are in error, and re-add them using their serial numbers? Will that resolve the names and connect status? Will this cause me problems with pushing changes?


Thanks,


Ambi

Who Me Too'd this topic