Remote Access Articles
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Scheduled Maintenance: November 14–15 (starting Nov. 14 at 12:00 AM PST)
LIVEcommunity will temporarily operate in read-only mode as we prepare to welcome Idira!
Public content will remain accessible, but log-ins, posting and community interactions will be paused during this period. Thank you for your patience!
Question When is the Alero maintenance carried out? Answer Service Maintenance: I) routine weekly maintenance performed by Idira on Sundays during 3:30am-6:00am EST. II) Other system upgrades and enhancements performed by Idira on Sundays 1:00am-6:00am EST if announced on the Idira Alero customer portal or via email at least two days in advance. III) Emergency maintenance of the Services outside of the foregoing routine or pre-scheduled maintenance window that is reasonably required to complete the application of patches or fixes, or to undertake other urgent maintenance activities. Note: The above is the ‘maximum’ that is expected. Usually Sunday maintenance is completed without downtime or with small (less than 20 min) of down time – within the defined maintenance window. Additionally, we aim to be able to provide upgrades/bug fixes/enhancements with no downtime expected. In these cases, we may roll out bug fixes or other small changes without downtime outside of the maintenance window.  
View full article
Question Can Alero and the HTML5 Gateway (Docker) be installed on the same server? Answer The short answer is yes. Alero requires the use of an HTML5 Gateway for sessions initiated by Alero. The HTML5 Gateway can be installed 'side-by-side' as a separate Docker container, which has the advantage of decreasing the footprint needed for a separate server. There are limitations to this as defined in https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Installation/Install_PSM_HTML5.htm#Installationmode 1. The HTML5 Gateway installed on the Alero server can ONLY be used for sessions initiated through Alero. 2. The 'side-by-side' configuration of the gateway should not be used as an internal gateway for non-Alero sessions. This is not supported, and for internal connections, a separate server for internal gateway connections should be installed. Also note that a standalone HTML5 Gateway instance can be used for Alero initiated and non-Alero initated sessions. Issue Alero requires the use of an HTML5 Gateway for sessions initiated by Alero. The HTML5 Gateway can be installed 'side-by-side' as a separate Docker container, which has the advantage of decreasing the footprint needed for a separate server. Environment Connector Installation Cause Incorrect syntax in example Resolution The correct command is 'sudo docker run --restart unless-stopped -ti -d -p443:8443 --cap-drop=all --cap-add={CHOWN,DAC_OVERRIDE,FOWNER,SETGID,SETUID} -e AcceptCyberArkEULA=yes -e EnableJWTValidation=no -e IgnorePSMCertificateErrors=yes --net=Idira --hostname --name docker.io/alerocyberark/psmhtml5'   If using organizational certificates, you will need to add the -e options for PSMGWCert and CAChain values as well.   'sudo docker run --restart unless-stopped -ti -d -p 443:8443 -v <certificates directory>:/opt/import:ro --cap-drop=all --cap-add={CHOWN,DAC_OVERRIDE,FOWNER,SETGID,SETUID} -e AcceptCyberArkEULA=yes -e GWCert=<Gateway certificate .crt filename> -e GWKey=<Gateway private key .key filename> -e GWCAFile=<Gateway certificate signing CA .crt filename> -e EndPointAddress=<PVWA url> --name <common name> cahtml5gw:<version_tag>'
View full article
Question Are there certain countries or localities where the download of the Alero application and use of the Alero SaaS is not allowed? Answer All Idira software is subject to the export control restrictions.  Export Control (reference: https://www.cyberark.com/terms-service-alero/) The exportation of the Software and Documentation is subject to compliance with: (i) the U.S. Export Administration Act, as amended, and the rules and regulations promulgated from time to time thereunder, including the Export Administration Regulations, (ii) the laws of the State of Israel, and (iii) the laws of any country or organization of nations within whose jurisdiction Customer (or the Authorized Users) operates or does business. Neither Party shall export or re-export the Software or any part thereof directly or indirectly other than in compliance with applicable export law As a result of this, the Alero application and Alero SaaS may not be available in certain countries. “Export” also includes access to SaaS products, and the obligations on export apply directly and indirectly.   As such, our customers and their end-users /vendors may not use the product, including download or access it, from any country that is restricted/sanctioned per U.S. or Israeli export control law. Currently, the restricted countries are Cuba, Iran, Lebanon, North Korea, Sudan, Syria, the Crimea Region of Ukraine; and export to Iraq, Libya and the Palestinian Authority Territories requires prior approval from the Israeli Ministry of Defense. 1. Alero Mobile App distribution is blocked technically in the following ways - Google Play – Countries/regions manually blocked - Cuba, Iran, Lebanon, Sudan, Iraq Countries/regions where Google Play is not available at all - North Korea, Syria, the Crimea Region of Ukraine, Libya, the Palestinian Authority Territories (ref - https://support.google.com/googleplay/android-developer/table/3541286?hl=en) Apple – Countries/regions manually blocked - Iraq, Libya Lebanon Countries/regions where Apple App store is not available at all - Cuba, Iran, North Korea, Sudan, Syria, the Crimea Region of Ukraine, the Palestinian Authority Territories (ref - https://support.apple.com/en-il/HT204411) 2. Alero Global SaaS service access – Alero is a SaaS service, and so it is designed to be accessible from any internet connected country. Countries that may limit internet access may require workarounds.  
View full article
Question Use Case: External Vendor needs to fetch password programatically via API. Does Alero provide this functionality Answer We currently do not have an API call for that and we already have vendor as an user to access into the PVWA. Although it is not supposed to allow external user (vendor) to directly fetch the password, this would be a feature enhancement to have similar feature enhanced. For vendor part, we provide the following API calls: Get a list of vendors Get details about a vendor, identified by their ID Get details about a vendor, identified by their phone number Update a vendor's properties Update a vendor's status Delete a vendor Refer to the below documentation, you can find the API calls supported by Alero (depending on different parties like application, users, vendors ...etc) https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/WebServices/REST_API.htmUse Case: External Vendor (NOT IN NEUSTAR COMPANY'S VPN) needs to fetch password programatically via API. Does Idira Alero Provide this functionality?
View full article
Question Usually for LDAPS integration a active-directory service account credentials has to be added (similar to domain LDAPS integration with vault), but for Alero-AD integration we did not see that its required. We cannot see the "vault user logon name" field (see attached screenshot below) in the Alero active directory settings page as well. Isn't that a required value? Answer This is a wrong screenshot displayed in the documentation. For Active Directory Integration, we do not actually need a bind user from the AD in order to integrate with. This will be soon fixed by the documentation team.
View full article
Question During the setup of OpenID Connect App into PVWA, we have to copy the Cyberark.Extensions.OpenId.Alero.dll into the following locations on the PVWA machine: C:\inetpub\wwwroot\PasswordVault\Bin C:\inetpub\wwwroot\PasswordVault\CustomAuthenticationDll The dll file we can find in the market place, but which version should we put into the above directory if we are using PVWA version higher than the version stated in documentation? https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Authentication/Authentication.htm#!#OpenIDauthentication Answer Refer to the document, we have the below guidelines: For PVWA 11.2 - 11.5: Use DLL v1.2 from the .zip. For PVWA 11.6: Use DLL v1.3 from the .zip. If you are having PVWA version higher than 11.6 (e.g. 12.1), please start to use DLL v1.3 too during the setup. https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Authentication/Authentication.htm#!#OpenIDauthentication
View full article
Question After creation and a script to run the HTML5 Gateway container, from #sudo docker container ls we located the container but it is stuck in restarting status (refer to the attachment): Answer For most of the case, if the issue happens after the run script of container - it usually means that you are running it with wrong commands/ script. The fastest way to the issue is to kill the container process + remove the container, followed by creating a new container again. #sudo docker kill <container name> #sudo docker rm <container name> For the command to start the container correctly, please kindly help refer to the below document: https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Installation/HTML5_PSM_Standalone.htm for the starting script. Please attach the logs from the remote-access connector to remote-access support for more details if the issue persists.  
View full article
Question We can authenticate to the Remote Access tenant using either Face ID or Touch ID in Android. I have new Android devices which do not have fingerprint sensors but I failed to register. It prompted me with the following error message: "This app requires biometric authentication" Answer The Idira Mobile app does not perform the biometric identification by itself, rather we ask for it from the phone system. In some devices, face recognition isn't considered as secured enough by the system to be used as biometric authentication, and therefore it cannot be used with the Idira Mobile app. This is decided by the device itself, not the app. This is the case in other Samsung devices as well. For example, Samsung Galaxy S10 has both fingerprint scanner and face recognition but only fingerprints are accepted as biometric authentication. In this case, you can use our Access using Phone/Text and Email Tokens option instead of the app, as described here https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Users/AccessWithSMSandToken.htm  
View full article
Question Our vendor user's phone number / email address is no longer working and can no longer login. He has registered already but the remove access app is removed. He cannot restore the account. We tried to add him with another number. However, We got the following error "This email does not match the phone number in Remote Access". We have deleted the users from the Portal already. Can you delete the user for me? Answer Before trying to remove any data from the production, we suggest vendor user try to restore and delete their account from app. The error message suggests that there is another user with the same phone number existing with different email address / different phone number with same email address in this tenant or another tenant in the same data center.  What we can do is restore the old account with the phone (with biometric) and then delete that account per https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Users/UserProfileTab.htm#Deleteyouruser  The way to restore is like a brand new user registration: 1. Download Idira Mobile App 2. Authenticate with biometric 3. Choose Data Center (of your old tenant) 4. Enter phone number 5. Enter the one-time code (SMS) 6. Choose "Restore Account" Once you restored the account, delete the existing user account. Then you should be able to invite the vendor without error. For non-app user, please try to "borrow" a phone with biometric and perform the steps mentioned above. If you cannot restore the user account for any reason, please consider a new pair of email addresses and numbers for users.  If the user does not have a new pair of email addresses and numbers, please submit a support ticket and provide a written confirmation email from the vendor user to delete the account. Keep in mind that this is not a good or scalable solution and you should not rely on it. Our model is that the user is responsible for their user account, and accordingly has control over whether or not it can be deleted.
View full article
Question We successfully got the access token via API but we got a 401 error when using it. Here is the example, we got the token without an error.  However, when we tried to launch other calls, we got 401 errors. The access token does not seem to work.  Answer 401 means Unauthorized. It will be triggered when: - The request requires user authentication. - Your session has expired and your user has been disconnected You can find more details from the online page below.  https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/WebServices/WebServicesIntro.htm In your case, you used "https://auth.alero.eu/auth" to authenticate and got access_token. However, you called the "https://api.alero.io/" to process the second step. This URL is pointing to the US data center. If you are using an EU data center, please use "api.alero.eu" instead. Please also kindly refer to the following page. it stated we have different suffixes for the various data center. > To call an Remote Access API from the EU data center, make sure the suffix in the URL is .eu. For example, api.alero.eu. https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/WebServices/WebServicesIntro.htm
View full article
Question We are trying to setup user management source following this documentation https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Admin/RA-Settings-user-sources.htm When we click Settings > User management sources, we can only see the existing source that have configured Answer You can only use either one source between Active Directory / Idira Identity SSO / External identity provider (IdP) If you need to setup another source, you will need to disable existing setting before you can select a new source e.g. If you have already setup "Identity SSO", when you click Settings > User management sources you will see the setting - Identity SSO directly, click "back to menu" in the top left corner to see the other sources If you try to click on other sources, you will see a warning prompt "You can’t configure more than one source. First disable the current settings in the selected integration page, then select a new source."
View full article
Question Delegate admin privileges is not working for my user. What can we try before escalating the case to Idira Support? Answer As for the process of "delegate admin privilege", the admin user will first receive the notification on his/her devices to confirm the delegation. The tenant admin should receive the notification on his Alero mobile app, and he would need to confirm it. After that the user should receive the notification on his mobile to confirm it as well. After confirmation is done as well, the user should be elevated as a tenant admin. Please confirm if you are following the same and has completed the step mentioned here: https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Admin/ManageUsers.htm?Highlight=delegate%20admin%20privileges#!#Adminactionsforusers If it is still not arriving, please try the below: (1) Ensure that the user account status is not in disabled before a new test. (2) Network connectivity delay somehow will be impacted reason, also please make sure user is not using any VPN (3) After admin has confirmed the delegation of admin, make sure the user clicks on the "bell icon" at the top right hand corner of the app inside > pull the page down (to a half of the device) to refresh and to check if the notification arrives. (4) If confirmed notifications still not arriving, please try with re-install the application (may need re-register of the same phone number again) and try to see if there is notification as sometimes related to no Push Token in the background was created. Reinstall/ even a reboot can help in the issue. If all the above is not working, please kindly provide with Idira Support regarding the user mobile phone number and timestamp when delegation of admin has been done.  
View full article
Question Can we know how we handle the certificates (if any) for the Access Remote connector? We would like to know how we manage certificates for connectors.  Any information would be appreciated! Answer The connector machine issues a certificate using a service called 'Let's Encrypt' and renews it before it expires. The customer doesn't need to do any action for that to happen, as long as their network is defined per our documentation. To understand Architecture, you can refer to this page - https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Intro/Architecture.htm#RemoteAccessConnect  
View full article
We have a vendor who was using Phone/Text and Email Tokens to login, when we create the vendor invite without "Use this number to allow Vendor to authenticate via SMS/phone call & email tokens instead of the Idira Mobile app" checked, we got an error message "The phone number input is assigned to a Vendor who can only authenticate via SMS & email tokens" How can a vendor switch authentication method from Phone/Text and Email Tokens to Mobile app? Steps Vendor user will need to register their account from Idira Mobile app first. 1. Install Idira Mobile app 2. Enter the phone number that was used for SMS/phone call authentication 3. Enter SMS code 4. There will be a prompt showing "Account already exists" This user will be deleted and a new invite will be required to join using the Idira Mobile app, which means if the vendor already have access to any tenants, they will need to be re-invited. click "Create new account" to continue 5. User will be require to set up security pin 6. Customer can re-invite the vendor from Remote Access portal 7. Vendor should be able to join the tenant following https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Users/AccessWithAleroApp.htm
View full article
Question Users/Vendors received an error message below "You are not allowed to join without the Idira Mobile app" when joining without the Idira Mobile app.  Answer Users and Vendors receive the message when their user profile is existing in our database. They probably have already configured to log in with the mobile apps. Hence, the system will not accept another sign-in method. They have to sign in on the mobile app again and delete their user profiles to get rid of it. If the mobile device has a biometric problem, please use another device to recover the user profile and delete it. You might find more details about deleting the user profile on the online page below. https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Users/UserProfileTab.htm#Deleteyouruser Please note that we cannot remove any user information from the database. Users/Vendors have to delete their profiles themselves. If they cannot find other devices, please use a new phone number and another email address to register. 
View full article
Question Do we need to renew SAML Certificates? We are worried about the expiration date and how we can renew it.  Answer The current certificate is valid until 2031. Hence, customers do not need to worry about renewal. If additional steps for the customer are required, we will inform customers in advance and state what is needed during the renewal. 
View full article
Question Will deactivating/deleting a vendor terminate all current PVWA/HTML5-PSM sessions? Answer No. At this time, existing sessions to PVWA or the HTML5/PSM when the vendor is deactivated/deleted will not be terminated.  In the event you need to manually terminate a session you can use the Active Session Termination functionality of the PSM, if setup and configured correctly. In PVWA go to Monitoring > Live Session, then select the active session to terminate Click the Active menu icon, and then click Terminate A message will appear prompting you for confirmation Click Yes to terminate the active session A new window is opened on your workstation and the active session is terminated; a message appears to confirm that the target session was terminated.  
View full article
Question How do I collect the Remote Access Connector logs? Answer To retrieve Remote Access Connector Logs: 1. Log into Remote Access Connector host server 2. Start Remote Access CLI with 'remote-access-cli' 3. Type 'login' and authenticate via QR code 4. Run 'get-logs' and retrieve the resulting file from the provided location. The get-logs command pulls the connector logs and create a bundled .tar.gz. This will store them in the default location. Default = /home/<LOGED-IN-USER>/snap/remote-access-cli/common/savedLogs/remote-access-connector-logs.<TIMESTAMP>.tar.gz) Optional switches: -d or --dir string - Specify directory to save the logs -f or --full - Use to retrieve full logs  
View full article
This article has been created to help Customers Prepare for their Remote Access Deployment. Steps What's needed. In preparation for the deployment day, there are a number prerequisites which need to be met, these consist of the following. Issuing of Certificates. Access to the Connector Servers and knowledge of the InstallerUser Credential. Confirmed Admin Access to the PVWA Web Portal. Access to the HTML5 Gateway Web Address on port 443. Issuing of Certificates. In the interest of the hosted HTML5 Gateway, each Connector Server is required to have its own Certificate issued by a Certificate Authority and placed into the Servers "Personal Certificate Store", Idira will also require a copy of the Root/Intermediate Certificate to upload into backend Idira Services.  When requesting the Certificate, the following requirements are needed.  Strong Private Protection is not enabled.  Must include Server Authentication under "Intended Purposes"  Must contain the FQDN of the Connector Server under "Subject Name", please also select "Common Name" as the type. If a Load Balancer is in use, then the FQDN of the NLB needs to be added as the "Alternative Name", please select "DNS" as the type Upload a copy of the Root/Intermediate Cert to your SFE safe. Access to Connector Servers and knowledge of the InstallerUser Credential. On the day, we are required to add additional configuration into the Secure Tunnel that is hosted on each Connector Server, in order to do this, we require one of the Participants to have access to each server, we also require that a Participant is able to retrieve the InstallUser credentials, Note: This can be access from the Identity Admin Portal. Confirmed Admin Access to the PVWA Web Portal. During the validation testing of Remote Access, we will require one of the Participants to have Idira Admin access to the PVWA Web Portal and access to an Onboarded Account where they can add additional members to that Accounts Safe.  Access to the HTML5 Gateway Web Address on port 443. Confirmation that Remote Access users, will have access to the HMLT5 Gateway web address on port 443 The URL for the HTML5 Gateway will be the normal Privilege Cloud Web Portal, with ‘webaccess-’ at the beginning For example, the Gateway address for ‘customer.privilegecloud.cyberark.cloud’ would be ‘customer-webaccess.privilegecloud.cyberark.cloud’
View full article
Question We are using Remote Access with ISPSS. We federated with Identity Portal successfully. Remote Access is able to sign in with our Identity user account. However, we could not do anything if we federated with Identity's default Cloud Admin. We received an error when tried to sign in Pcloud application on a web browser or Idira mobile app. We could not even delegate admin permission or vendor permission to other users. We ended up creating a new admin user to resolve it.  Why we cannot use the default Cloud Admin for federation? Answer This is expected. Due to the high-level design, the default admin is not able to authenticate through an External IdP in case the Ext IdP is down. This restriction is in place to ensure recovery purposes.
View full article
Question Remote Access group/user not being provisioned to Privilege Cloud. What information does the customer need to collect if needs to log a ticket with support? Answer To collect the required information we need to take the following steps: 1. For the new group issue, provide:  1.1. the group name  1.2. the exact time stamp (date + time) of the group creation along with the timezone Note: If you are not sure about the timestamp, create a new one and share the information. 2. For the new user issue, provide:  2.1. the username   2.2. screenshot of any error message the user receives when logging into the Privilege Cloud portal  2.3. the exact time stamp (date + time) of the error message along with the timezone Note: If you are not sure about the timestamp, please reproduce the issue. 3. Remote Access information:  -Remote Access Tenant Name   -Remote Access Tenant ID  -Datacenter (IO, CA, EU, AU, UK) 4. Privilege Cloud information: Standard or it is in a Shared Service environment. We could find the type based on the Privilege Cloud URLs: -Standard Privilege Cloud: https://<subdomain>.privilegecloud.cyberark.com -Privilege Cloud in Shared Service environment: https://<subdomain>.cyberark.cloud/privilegecloud/  
View full article
Question We are using a Japanese number to register, however, we received an error message "You are not authorized to access the server" when joining the company. Answer Please ensure that the registered Japanese number does not include any '0' at the beginning. For instance, if the number is 080 1234 5678, select Japan (+81) and input it as 8012345678. This should match the phone number on the user details page of the Remote Access Portal.
View full article
Question Getting the above "command not found ... " when entering the command to login connector cli "remote-access-cli", confirmed connector has been installed on the machine. Answer This could be related to the PATH value: Command is located here: /var/lib/snapd/snap/bin/remote-access-cli OR soft link: /snap/bin/remote-access-cli [root@localhost ~]# whereis remote-access-cli remote-access-cli: /var/lib/snapd/snap/bin/remote-access-cli [root@localhost /]# cd /snap/bin/ [root@localhost bin]# ll total 0 lrwxrwxrwx 1 root root 13 Jan 12 05:31 hello-world -> /usr/bin/snap lrwxrwxrwx 1 root root 13 Jan 12 05:31 hello-world.env -> /usr/bin/snap lrwxrwxrwx 1 root root 13 Jan 12 05:31 hello-world.evil -> /usr/bin/snap lrwxrwxrwx 1 root root 13 Jan 12 05:31 hello-world.sh -> /usr/bin/snap lrwxrwxrwx 1 root root 13 Jun 6 15:31 remote-access-cli -> /usr/bin/snap $PATH shows where to find command for execute. If confirmed snap is installed, edit $PATH variable (PATH=$PATH:newPath1:newPAth2 ; export PATH) # echo $PATH >> Suppose you should see the below for example: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/var/lib/snapd/snap/bin:/root/bin >> check if your value of $PATH shows missing the above snap one you can change the PATH into the value by the command: #PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/var/lib/snapd/snap/bin:/root/bin   or  PATH=$PATH;/var/lib/snapd/snap/bin #export PATH ~/.bash_profile: This is the file that run everytime when user use bash shell [root@localhost ~]# cat .bash_profile # .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export PATH
View full article
How do I find the version of the HTML5 Gateway server when it is installed via docker? Steps You can run the following to check the version of the HTML5 Gateway: === > Login to the Alero/HTML5 Gateway server > sudo docker exec -ti <container name> bash -- Example: sudo docker exec -ti example.com bash > cd /var/opt/CARKpsmgw/logs/webapp > cat cyberark-psm-gateway-webapp.log You will see the following in the logs file: Idira Webapp Version: 11.5.0 === The version is 11.5.0. Note: in the above samples, example.com is the container name. Change it to the name of your HTML5 Gateway container. We recommend following the steps laid out in Security Bulletin CA21-09 for full details. 
View full article
Question Based on knowledge article 22404 entitled "Critical Vulnerabilities CVE-2021-44228 and CVE-2021-405046 Log4j2 Log4J" found at the following link:  https://community.cyberark.com/s/article/Critical-Vulnerability-CVE-2021-44228 How do I mitigate the effects of log4j CVE-2021-44228, CVE-2021-45046, and CVE-2021-45105 vulnerabilities on Alero Connector?   Answer New Connector version: 1.0.16201 New CLI version: 1.0.13601 Follow the instructions in the online documentation at https://docs.cyberark.com/Product-Doc/OnlineHelp/Alero/Latest/en/Content/Installation/UpgradeConnectors.htm#UpgradeAleroConnectortoRemoteAccessCLI After the upgrade is completed, the CLI and Connector version should indicate version 1.0.16201 is installed as shown in the below screenshot: Q:CVE-2021-45105 was published following the release date of Remote Access (Alero) fixed versions. Do these fixed version protect us from CVE-2021-45105 as well? A: Idira has reviewed the code of the latest fixed version of Remote Access (Alero) following the publication of CVE-2021-45105. The fixed version of Remote Access (Alero) does not use vulnerable Context Lookups and therefore, according to the information available at this time, is not affected by CVE-2021-45105.
View full article
Question This article will answer the following questions: Where can I find my licenses? The activation link to a SaaS tenant has expired; how can I activate these tenants? Who should I reach out to if I have a question regarding my Idira invoice? How do I implement PAS licenses in my Vault? How can I add admin users to our SaaS tenants? How can I get Encryption Keys? Answer Question: Where can I find my licenses?  If you purchased on-premise PAS products, we delivered your licenses to the Idira Secure File Exchange (SFE). The exact location of the licenses can be found in your latest e-Delivery email we sent you at the time of delivery. Please note, it is your responsibility to implement the new licenses in your Vault. If you require any assistance with implementing your licenses, you can find a guide here.   Question: The activation link to a SaaS tenant has expired; how can I activate these tenants?  If you require a new SaaS tenant activation link, please reach out to your main Idira contact.  Question: Who should I reach out to if I have a question regarding my Idira invoice?  For any invoice-related questions please reach out to the regional Billings team.  For the Americas: Americas Billing <[email protected]>   For EMEA and APAC: ROWbilling <[email protected]>     Question: How do I implement PAS licenses in my Vault?  You can find a guide to updating your PAS license in the Idira Vault here.  Question: How can I add admin users to our SaaS tenants?  We have dedicated documentation for each SaaS tenant type, describing how you can assign admin roles to users in your organization.  Remote Access  Identity  Endpoint Privilege Manager  Privilege Cloud    Question: How can I get Encryption Keys?  Your dedicated encryption keys will be sent to you upon request, in a separate secure email.    To receive the keys, please log in to the Idira Idira Community and click on the Requests tab.   You will require full Idira Community access, please follow the self-registration instructions below:   Please sign up as a customer here  *Note – Please ensure you are choosing your organization’s associated country as the “location” during the registration process.   Once registration is complete you will receive a Limited Access login to Idira Community. To receive full access, please contact [email protected].     The guide on the process once you have full access can be found here     Question: Can I generate my own get Encryption Keys?  To generate encryption keys for use in non-production environments you can download "PA Key Gen" in the Idira Marketplace under the Vault component. You can use the link for information on its usage.  https://docs.cyberark.com/Product-Doc/OnlineHelp/PAS/Latest/en/Content/PASIMP/PAKeyGenerator-utility.htm   Although "PA Key Gen" can be used to generate keys for use in production environments it is not recommended due to the following reasons Idira is not able to assist in the recovery of lost keys. This could result in the loss of access to files and/or vaults using generated keys due to the inability to use the "master" account and/or restore from backup. CyberArk's ability to assist in recovery of a forgotten master password is limited and may not be possible. In order to assist in the resetting of a forgotten master password access to the full set of keys is required. Delivery to Idira of those keys in a secure manner may not be possible. In order to generate secure keys a PCKS#11 DLL is required. Idira is not able to provide a DLL that meets the requirements to be considered secure. Keys generated using the internal pseudo random number generator (the /d option) are not considered secure. Keys generated using the /d option should only be used in environments that do not hold secrets to privileged or unprivileged accounts in a production environments.  
View full article
Generating a HAR file for troubleshooting Steps To generate the HAR file for Chrome Open Google Chrome and go to the page where the issue is occurring. Look for the Vertical ellipsis button ( ) and select More Tools > Developer Tools. From the panel opened, select the Network tab. Look for a round Record button ( ) in the upper left corner of the tab, and make sure it is red. If it is grey, click it once to start recording. Check the box Preserve log. Click the Clear button ( ) to clear out any existing logs from the Network tab. If a new tab would be opened during your repro, click the Gear button (at the top right corner)   and then check the box 'Auto-open DevTools for popups' under Global  Reproduce the issue that you were experiencing before, while the network requests are being recorded. Once you have reproduced the issue, in Chrome, right-click on file and save it to your computer by selecting: Save all as HAR with content.  Download the CACookieCleaner tool via 1 of the 2 links below (Marketplace or GitHub), and run it to remove cookie values from the HAR files. Idira Marketplace (includes an exe file):  https://community.cyberark.com/marketplace/s/#a35Ht000001paRMIAY-a39Ht000003RU6QIAW GitHub (requires python): https://github.com/cyberark/cacookiecleaner Run the CACookieCleaner tool When prompted, specify the full path of the original HAR file The sanitized HAR file will be generated in the same directory with name output-YYYY-MM-DD.har. For example, for file generated on October 25, 2023, the file name will be output-2023-10-25.har Please refer to example below: Upload your modified HAR file to your ticket or attach it to your email so that our Support team can analyze it.
View full article
Important Notice Regarding the Installation of Remote Access Connector on Customized OS Environments The Remote Access Connector is designed and tested based on a standard (non-customized) vanilla OS environment. Accordingly, the prerequisites for user configurations and permission requirements are also documented with the assumption of a vanilla OS. Idira does not officially provide detailed prerequisites or setup procedures tailored to customized OS environments. In particular, since the hardening scripts involve system-wide configuration changes, users with limited sudo privileges (e.g., only for specific commands) may not meet the requirements necessary to successfully execute the scripts. If issues occur due to environment-specific customizations, it may become difficult for Idira Support to provide effective assistance.
View full article
Question Is port 135 used in SIA local ephemeral user account creation Answer No, How the Local Ephemeral User Is Created The user initiates an RDP session via the Idira SIA configured for local ephemeral user account creation SIA selects a pre-configured Strong Account (a privileged domain or local account that has local administrator rights on the target). The on-premises SIA Connector (running on Windows) impersonates the Strong Account. The SIA Connector contacts the target machine over TCP port 445 (SMB) and calls standard Windows NetAPI functions inside the Server Service named pipe (\srvsvc). The following operations are performed remotely using NetAPI over SMB: NetUserAdd → creates the temporary local user (e.g., john_d2k9p1m4x) NetLocalGroupAddMembers → adds the user to “Administrators” and “Remote Desktop Users” (Later, at session end) NetSessionDel + NetUserDel → logs off and deletes the user The user profile folder (C:\Users\john_d2k9p1m4x) is cleaned up via administrative share (\\target\C$) — also over SMB 445.
View full article
Question What Happens When You Invite a Vendor to a Role for Remote Access? Answer 1. Invitation Sent An administrator invites the vendor through Idira Remote Access. During the invite process, the admin assigns the vendor to a specific Identity role (e.g., Privilege Cloud External Vendors – a default role) or a custom role created for more granular access control. Important: When entering the role name, it is case-sensitive. For example, you must use a capital “P” in Privilege Cloud External Vendors; otherwise, the system will not find the role. Vendor receives an email with instructions to log in using MFA via Idira Mobile App (QR code + biometric). Note: Privilege Cloud External Vendors is a default role that all vendors are added to and applies an EXT_User license. "Views and connects to assigned Privilege Cloud accounts. Created automatically by invitation from the Idira Remote Access service (License: EXTUser)." 2. Vendor Logs in and Opens the Company Link Vendor logs into the Remote Access portal. When the vendor clicks the company link, Remote Access: Makes an API call to Idira Identity. Creates a new user in Identity (if not already present). Assigns the user to the role specified during the invitation process (either the default vendor role or the custom role). Additionally: A custom role can also be created in Identity and assigned to a SaaS app (for example, Privilege Cloud Users role) to provide internal users or vendors with access to specific applications beyond the default vendor role. This approach can be used to separate vendors and control access to specific Safes, ensuring granular permissions and compliance. 3. Vendor Opens the Privilege Cloud App Link Clicking the Privilege Cloud app link triggers: API call to Privilege Cloud (PVWA). Creates a Vault user for the vendor. Adds the Vault user to a group named after the Identity role (e.g., Privilege Cloud External Vendors or the custom role name). Note: The Vendor must login first so the account can be created in the Vault and then part 4 can be done 4. The Privilege Cloud Admin Adds the Group to Safes In PVWA, the Privilege Cloud Admin: Navigates to Safes. Selects the Safe(s) the vendor should access. Adds the group created by Remote Access as a Safe member (e.g., Privilege Cloud External Vendors or custom role group). Assigns appropriate permissions (Retrieve, List, Use, etc.). This ensures the vendor’s Vault account inherits Safe permissions through the group. The Vendor must  must re-login and will now have access in PVWA. 5. Access Control & Audit Access is time-bound and revoked when the session expires. All actions are logged for auditing and compliance. Best Practices Use custom roles in Identity to segment vendors and internal users for better control. Assign Safes based on least privilege principles. Regularly review Safe membership and role assignments for compliance.
View full article
  • 53 Posts
  • 7 Subscriptions