Idira Remote Access: Is vault user needed for binding during Active Directory Integration?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Remote Access Articles
1 min read
L2 Linker
No ratings

Question

Usually for LDAPS integration a active-directory service account credentials has to be added (similar to domain LDAPS integration with vault), but for Alero-AD integration we did not see that its required. We cannot see the "vault user logon name" field (see attached screenshot below) in the Alero active directory settings page as well. Isn't that a required value?
ka32J000000YXg2QAG__eid=ka32J000000YXg2&feoid=00N2J000009R3kr&refid=0EM2J000002kslA.png

Answer

This is a wrong screenshot displayed in the documentation. For Active Directory Integration, we do not actually need a bind user from the AD in order to integrate with. This will be soon fixed by the documentation team.
Rate this article:
  • 683 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-05-2026 12:10 PM
Updated by: