Remote Access: Vendor unable to authenticate via SMS

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Remote Access Articles
2 min read
L3 Networker
No ratings
It is sometimes necessary to switch a vendor's authentication method to be able to use SMS. However if the vendor was previously added as an 'app user', the app user status overrides any additional settings that the user may have, including authentication with SMS

Issue

An account was set up an account on safe for a user but when the invite sent to him, users needs to access through msm , user has the option of msn within the invite however he gets an error message that says: ''you are not allow to join with CyberArk''

Environment

Mobile Authentications

Steps

Steps
1. On a mobile device, install the Remote Access application.
2. You will need the vendor's mobile number
3. In the Remote Access application, enter the vendor's phone number and have the vendor read back the code to you
4. If given the option to restore the user or create a new user, select 'Create a new user'. This will delete the current user from the portal and create a new user
5. Click the menu in the top left corner of the app. Select the vendor and then select 'Delete User'
6. At this point the tenant admin should create an invitation for the vendor, making sure to enable SMS authentication
7. The vendor should accept the invitation and request a code.
8. Once the vendor accepts the code, they should enter a code and generate a token which they will receive via email
9. The vendor should enter the token for access
Rate this article:
  • 2106 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-03-2025 09:01 PM
Updated by: