Dear Community, When we try to access the window server via PIM. The session is connected but its auto disconnect starts within 1 min. please suggest what can be an issue ..attached is the error message.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Dear Community, When we try to access the window server via PIM. The session is connected but its auto disconnect starts within 1 min. please suggest what can be an issue ..attached is the error message.

L2 Linker
6 REPLIES 6

L7 Applicator

Load-balancing involved?

Load-balancing is not involved.

L2 Linker

M@ (Community Manager) (CyberArk), Please suggest!

hey @Sharif Ahamad​ 

is this only occurring with 1 connection?

can you see anything in the PSM logs if you enable debug and do it again?

 

does the same thing happen if you RDP into the PSM server and then RDP to the target outside of Cyberark? this will mimic the connection and should point out a problem if it's outside of cyberark.

 

-Matt

Hi M@ (Community Manager) (CyberArk),

 

This is an issue happening on only 1 server. Also tried to RDP from the PSM server same issue. But outside of Cyberark, RDP is working fine on that server.  

 

I have noticed one thing that the Target server is not pinging or telnet on the CPM server & the CPM server is not ping on the target system (they are not communicating with each other )

 

Kindly Assist this can be the reason for disconnecting the RDP of the target server. Or any other reason The session is connected but its auto disconnect starts within 1 min.

there's not much I can help with using the information you've provided. You need to review the logs to see why the account is being kicked out.

 

-Matt

  • 259 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!