- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
12-27-2021 12:53 AM
Dear all
All of the users connect to machines through RDP and everything seems to be ok for now. One of the user need to connect to host machine through VNC as RDP wont support token device. is it possible to connect to host machine trough VNC instead of RDP for one user only?
12-28-2021 11:32 AM
@Babak Khalilzade There are couple of ways to work with this use case.
12-28-2021 09:04 PM
Dear Venky
The problem is that how can i add vnc connector to psm. is there documentation or video instruction?
12-30-2021 02:27 PM
@Babak Khalilzade , I guess, you already have vnc out of box, duplicate & change the parameters as needed. Here is some documentation (Connection Component Configuration | CyberArk Docs) to configure the connector. But if you need in detail as video instruction, you may find in partner trainings portal (CyberArk PAM Administration for Partners - Self-Paced - CyberArk or ).
01-05-2022 03:39 AM
Hello Venky
The link you provided for video instruction is not available. is there other source that i can find useful to configure the connector?
01-05-2022 04:52 AM
Hi @Babak Khalilzade , That's the link for training video, The link is accessible, if you are partner to CyberArk. That could be reason.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

