Configure Debugging for Privilege Cloud Connected Credential Providers

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Scheduled Maintenance: November 14–15 (starting Nov. 14 at 12:00 AM PST)
LIVEcommunity will temporarily operate in read-only mode as we prepare to welcome Idira!
Public content will remain accessible, but log-ins, posting and community interactions will be paused during this period. Thank you for your patience!
Secrets Management Articles
2 min read
L2 Linker
No ratings
For Privilege Cloud  : In a Privilege Cloud Environment direct access to the AppProviderConf safe cannot be provided. The following method should be followed to enable and disable debugging for credential providers.

Steps

Enable Debugging

  1. Create a new local_overrides.txt file in the installation directory for Credential Provider
    1. Windows – Create this file in the ApplicationPasswordProvider folder.
    2. UNIX – Create this file in the /etc/opt/CARKaim/conf folder.
  2. Add the following in the local_overrides.txt file:
[Debug]
CacheDebugLevels=0,1,2
AppProviderDebugLevels=0,1,2,3,4,5
ProtocolDebugLevels=0,1,2
  1. Rename the file to local_overrides.conf
  2. Refresh the parameters using the appprvmgr.exe utility.
    1. Windows: C:\ProgramFiles\ApplicationPasswordProvider\Appprvmgr.exe refreshparms
    2. Unix: /opt/CARKaim/bin/appprvmgr refreshparms
  3. Verify settings are changed with the appprvmrg.exe utility
    1. Windows: C:\ProgramFiles (x86)\ApplicationPasswordProvider\Appprvmgr.exe showparms
    2. Unix: /opt/CARKaim/bin/appprvmgr showparms
 

Disable Debugging

  1. Create a new local_overrides.txt file in the installation directory for Credential Provider
    1. Windows – Create this file in the ApplicationPasswordProvider folder.
    2. UNIX – Create this file in the /etc/opt/CARKaim/conf folder.
  2. Add the following in the local_overrides.txt file:
[Debug]
CacheDebugLevels=0
AppProviderDebugLevels=0
ProtocolDebugLevels=0
  1. Rename the file to local_overrides.conf
  2. Refresh the parameters using the appprvmgr.exe utility.
    1. Windows: C:\ProgramFiles\ApplicationPasswordProvider\Appprvmgr.exe refreshparms
    2. Unix: /opt/CARKaim/bin/appprvmgr refreshparms
  3. Verify settings are changed with the appprvmrg.exe utility
    1. Windows: C:\ProgramFiles (x86)\ApplicationPasswordProvider\Appprvmgr.exe showparms
    2. Unix: /opt/CARKaim/bin/appprvmgr showparms
For more information about the appprvmgr utility see, Credential Provider Utility in Idira Documentation
Rate this article: