Managing Postgresql settings for increasing the count of running Conjur hosts

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Secrets Management Articles
1 min read
L4 Transporter
No ratings
For Conjur 13.0+ versions, there are four Postgresql settings that should be changed when increasing the supported Standby and Follower count from the default of 16

Steps

These are:

=====
- 'max_wal_senders': Default is 16. This should equal the maximum number of Standbys and Followers planned in the Conjur deployment.

- `max_connections`: Default is 100. This should increase by 2 for each additional Follower planned about the default. For example, if the `max_wal_senders` is increased to 20, then `max_connections` should be at least 108.

- `max_worker_processes`: Default is 26. This should be at least 10 more than the max_wal_senders value. For example, for 20 wal senders, the max worker processes should be at least 30.

- `max_replication_slots`: Default is 21. This should be at least 5 more than the max_wal_senders value. For example, for 20 wal senders, the max replication slots should be at least 25
=====

------------------------------------------------------------------------------------------------------------------------------------------------------------------

For versions prior to 13.0, there are only two parameters to configure per your needs:
"max_connections" and "max_wal_senders"

The process for managing them is here: Changing the "max_connections" and "max_wal_senders" for DAP containers

Rate this article:
  • 1429 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎08-14-2025 01:33 PM
Updated by: