CCP loadbalancing error

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

CCP loadbalancing error

L3 Networker

Dear Community,

we try to setup the ccp behind a citrix adc loadbalancer but get the following error if we try to connect via the lb: "The underlying connection was closed: An unexpected error occurred on a receive."

 

The LB Team said that they configured the lb in SSL Offloading mode with x-Forwarded-For Header. We edited the web.conf file on both ccp servers and added the snip of the adc.

 

Did someone have this error and can assume what's wrong here?

 

Thanks in advance for your help,

Lukas

 

3 REPLIES 3

L7 Applicator

Hi @Lukas Böllert​ 

 

This error possibly indicates issue related to SSL/TLS handshake.

 

  • Please check that the ADC is handling the SSL termination properly and forwarding the decrypted traffic to the CCP servers.
  • Verify that the SSL certificates used by the CCP servers are also valid and trusted by the ADC.
  • Validate that the Citrix ADC can communicate properly with the CCP servers over the required ports.
  • Also check that there are no firewalls or security groups blocking the traffic between the ADC and the CCP servers.

 

Hope it helps !

 

 

L3 Networker

If you are using PowerShell to test sometimes you need to enable TLS1.2

 

Run this before your code

[System.Net.ServicePointManager]::SecurityProtocol = [System.Net.SecurityProtocolType] 'Tls12,Tls13'

 

 

L3 Networker

I think that we had identified the error. We had set an alias for the vip of the lb and the ccp do not answer if we want to call this alias in the api request. We could temporery solve this issue if we edit the host file and set the alias for the ip of the ccp servers. Do you know if we are able to configure a setting in the iis so the ccp's also listening on the alias?

  • 251 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!