- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
06-12-2019 02:37 AM
We have few applications retrieving credentials from the Vault using CCP. At present, all these applications are configured only with "Allowed Machines" parameter. We have requirement where an Application needs to be authenticated with the Client Certificate. Can we enable Certificate Authentication just for 1 application without changing the Auth mechanism for others? From the guides it looks like since its done by IIS, its a global setting, which if enabled, will then require certificate from all applications consuming CCP
06-12-2019 03:54 AM
Hi @Ratul Gandhi ,
I'm not certain, but I think the moment you activate an authentication method, it is also applicable for the other applications that use the same setup. Since otherwise that same application could also use no authentication.
I'm not 100% certain but that seems the most logic answer. Otherwise what's the point of the authentication, if you can still allowed to only use the allowed machines parameter, but not an extra authentication.
But if you have a test environment, you can easily test this.
Kind regards,
Jelle
06-12-2019 04:14 AM
Support for multiple configurations is possible:
https://cyberarkdocu.azurewebsites.net/Product-Doc/OnlineHelp/AIM/Latest/en/Content/CCP/Configure_CCPWindows.htm#SupportMultipleSecurityConfigurationsfortheCentralCredentialProviderWebService
06-12-2019 04:22 AM
Hi @Pete Maan
By using this setup you suggest. That means that the enduser needs to choose between the two urls. Aren't you creating a backdoor? Since you could fetch the password of the application where you need to use the Windows certificate, by using the other URL.
Kind regards,
Jelle
06-12-2019 04:36 AM
With the correct configuration, this will not be the case.
The application will be configured to require a certificate, which will need to be included in the request to CCP. If the URL which will not accept Client Certificates is used, the authentication requirements will not be met.
06-12-2019 05:03 AM
Hi @Pete Maan ,
Isn't it easier to create two different applications in CyberArk. One with certificate and another one without certificate authentication.
In the background you can choose on which safe they need to have access.
This way you can say that machines with that IP need to use a certificate and on the other IP don't need to use certifcate.
Kind regards,
Jelle
06-12-2019 08:57 AM
If IIS is configured to require a client certificate, then this would affect all calls to CCP - the requirement from @Ratul Gandhi is to enable Certificate Authentication just for 1 new application without changing the Auth mechanism for the existing applications.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

