- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
04-24-2019 02:57 AM
Hey Guys-
We have a workgroup CCP server which is able to communicate with the global vault without any errors. A sample script run directly from the CCP server yields desired results
But if I try running the script from another workgroup server which is connected to the CCP server I get the following error:
"ErrorCode": "PDKTC020E",
"ErrorMsg": "Failed to decrypt password from response ([PDKPR013E Failed to decrypt message (Reason: Length of the data to decrypt is invalid)])"
Could this be because of the workgroup nature of the server?
04-26-2019 08:31 AM
Hey AN,
This is definitely possible, but we'd really need to see the logs to find out what exactly is going on here. Do you have other CCP servers that work with a non workgroup configured machine?
Thank you,
Sarah
04-29-2019 01:25 AM
@Sarah Stern yup, we CCP servers in the domain as well that work as expected. Should I enable trace level 5 ?
04-29-2019 08:15 AM
Hey AN,
Yes, increase trace levels and see what you get back. This is the kind of thing that really requires logging information to get a good grasp on.
Thanks!
Sarah
05-22-2019 11:21 AM
Hello,
Has this issue been resolved? We're actually experiencing the exact same error.
05-27-2019 12:50 PM
@Anand Negi , @Christopher Ellis
Were you able to resolve the error? We have bumped into same error.
Couple of findings so far.
05-28-2019 07:24 AM
@Pete Maan do you have any insights on the above error?
05-28-2019 07:35 AM
Sorry @Mohan Bandha , not something I have come across.
05-28-2019 08:02 AM
@Mohan Bandha Turned out to be a version issue. The CP was ver 9.7 and the AIMWebservice was ver 10.5 and this was causing the error. Once i streamlined the versions, it started working as expected
05-29-2019 04:23 AM
Thanks @Anand Negi Consolidating the versions did the trick. However, the client certificate authentication fails on v10.5.1 CP and CCP setup on Win2016 with error "Could not obtain client certificate details" . I am able to access the wsdl with certificate and the same setup (client cert) works on CCP/CP 9.5 on Windows 2012.
Did I miss something?
05-31-2019 04:23 AM
Apparently, it was a configuration issue. Having same versions of CP and CCP is the solution. Closing this thread.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!

