SyslogMsgsQueueNotificationThreshold parameter in dbparm.ini accepts the threshold level. 1000 is the default threshold level. What is the recommended level? Is there an upper limit?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

SyslogMsgsQueueNotificationThreshold parameter in dbparm.ini accepts the threshold level. 1000 is the default threshold level. What is the recommended level? Is there an upper limit?

L4 Transporter
1 accepted solution

Accepted Solutions

L4 Transporter

Regarding the syslog setting, the recommended is the best practice. If your syslog queue goes above 1k,then something is wrong.

​

Regarding AIM, on default 3 min setting they cause some significant load on the vault when there are dozens so you usually would update them to either 15 min queries or work on a satellite vault.

View solution in original post

4 REPLIES 4

L4 Transporter

On SIEM, I find lot of events VAULT-PROD CEF: 0|Cyber-Ark|Vault|10.3.0000|56|Failure: Find Files|7|act="Find Files" suser=Prov_host fname= dvc= shost=IP dhost= duser= externalId= app= reason= cs1Label="Affected User Name" cs1= cs2Label="Safe Name" cs2="safe" cs3Label="Device Type" cs3= cs4Label="Database" cs4= cs5Label="Other info" cs5= cn1Label="Request Id" cn1= cn2Label="Ticket Id" cn2= msg=

 

These are related to AIM CP, is there a way to contain these events?

L4 Transporter

Regarding the syslog setting, the recommended is the best practice. If your syslog queue goes above 1k,then something is wrong.

​

Regarding AIM, on default 3 min setting they cause some significant load on the vault when there are dozens so you usually would update them to either 15 min queries or work on a satellite vault.

L4 Transporter

Thanks Kostya for your response. Figured out the root cause and addressing it. Apparently there was no need to adjust the syslog setting.

 

On the AIM, the issue was not with password queries of existing objects, it was more to do with mis-configuration of the application that has created huge traffic of password requests for non existent objects.

L4 Transporter

Glad you had this solved 🙂

  • 1 accepted solution
  • 404 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!