12-13-2021 06:24 PM - edited 12-13-2021 06:26 PM
It works well before reboot. After reboot, log collectors are showing disconnected and not detected peer log collectors. Not sure is there any firewall is blocking between the two panoramas.
12-13-2021 07:22 PM
Thank you for the post @Arkar_Aung
Could you please login to log collector and get logs to see what is happening: tail lines 200 mp-log ms.log
Based on details of the logs, I would take troubleshooting further.
Log collector will initiate a connection to Panorama with destination port TCP: 3978. Just in case, could you make sure that you can get to: https://<Panorama IP address>:3978 ? Make sure that certificate is not expired.
Kind Regards
Pavel
12-13-2021 07:22 PM
Thank you for the post @Arkar_Aung
Could you please login to log collector and get logs to see what is happening: tail lines 200 mp-log ms.log
Based on details of the logs, I would take troubleshooting further.
Log collector will initiate a connection to Panorama with destination port TCP: 3978. Just in case, could you make sure that you can get to: https://<Panorama IP address>:3978 ? Make sure that certificate is not expired.
Kind Regards
Pavel
12-15-2021 12:20 AM
Hi Pavelk,
Thanks for your help. Based on the log, I found TCP port 3978 is blocking. Now the log collectors are connected once I opened FWs.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
