Auto-attaching VM series to Panorama in AWS

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Auto-attaching VM series to Panorama in AWS

L2 Linker

I am trying to boot and auto-attach a VM series FW to Panorama in AWS. I am specifying the user-data as follows:

 

type=dhcp-client
hostname=aws-palo-1
panorama-server=a.b.c.d
tplname=lz-firewall
dgname=lz-firewall
dns-primary=8.8.8.8
dns-secondary=8.8.4.4
op-command-modes=mgmt-interface-swap
dhcp-send-hostname=yes
dhcp-send-client-id=yes
dhcp-accept-server-hostname=yes
dhcp-accept-server-domain=yes
vm-auth-key=<omitted>

 

But after the firewall boots it is not attaching itself to Panorama. Is it supposed to connect to Panorama and add itself? What's the point of the vm auth key?

1 accepted solution

Accepted Solutions

L2 Linker

The issue was I did not have the proper tplname value. I was using a template name, it should have been the stack name.

View solution in original post

1 REPLY 1

L2 Linker

The issue was I did not have the proper tplname value. I was using a template name, it should have been the stack name.

  • 1 accepted solution
  • 1411 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!