02-22-2022 02:38 PM
Hello LiveCommunity
I am currently trying to test GlobalProtect on my setup in AWS Cloud. However I have some doubts about the configuration of the Gateway.
In the GlobalProtect Gateway Configuration
The interface asked will be my "Outside" interface right? Asking that question because every video I have seen in the IPV4 configuration it lets you configure the /24 subnet of the interface but in my case this is a DHCP interface which it doesnt let me add any IP, I just have the "NONE" option there.
Am I doing something wrong in this step?
Also Im assuming this will be the gateway the users will use to put the IP in their browser so they can download the client to connect.
Best Regards!
02-24-2022 11:38 AM
You will need to associate an AWS EIP (External IP) to the interface on that PAN that the GPGateway lives on. External users will connect to the EIP and be Nat'd to the DHCP address on the firewall. Even though the IP is DHCP it won't change as long as you don't terminate or detach the interface from the firewall.
02-24-2022 11:38 AM
You will need to associate an AWS EIP (External IP) to the interface on that PAN that the GPGateway lives on. External users will connect to the EIP and be Nat'd to the DHCP address on the firewall. Even though the IP is DHCP it won't change as long as you don't terminate or detach the interface from the firewall.
02-24-2022 01:58 PM
Thank you! as you said I configure it anyways as it said None in the IPs but it worked.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
