- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
02-07-2023 07:59 AM
Hello!
I have a question, if I need Panorama to manage virtual firewalls and appliances for the deployment profile, is it enough to just enable panorama?, or is it necessary to add more cpu for panorama? According to the documentation it only adds CPU for the firewalls and only enables Panorama, but I'm not sure if I need more CPU.
02-07-2023 08:10 AM
Hi @NG25_1 ,
It sounds like you are talking about Software NGFW Credits. If so, then it is enough to check the Panorama box. You do NOT need to add vCPUs. That is what I have been told.
Thanks,
Tom
02-07-2023 08:10 AM
Hi @NG25_1 ,
It sounds like you are talking about Software NGFW Credits. If so, then it is enough to check the Panorama box. You do NOT need to add vCPUs. That is what I have been told.
Thanks,
Tom
06-26-2023 12:51 AM
Hi All,
Just to understand is 2vCPU is same as 4CPU Core?
Regards,
Sanjay S
06-26-2023 04:14 AM
Hi @Sanjay_Ramaiah ,
Cores are a specification of the CPU hardware and vCPUs are created by the hypervisor. With regard to Panorama, the specifications only say CPUs, which can be vCPUs. https://docs.paloaltonetworks.com/panorama/9-1/panorama-admin/set-up-panorama/set-up-the-panorama-vi...
Please start a new thread when changing topics.
Thanks,
Tom
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!