how to setup palo alto for dual stack for IPv6 internet

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

how to setup palo alto for dual stack for IPv6 internet

L0 Member

Hi,

I have configured PAVM in azure with IPv4 and everything is working fine. so I decided to add IPv6 as a Dual stack. And Azure provided me single Public IPv6 and it configures on the Azure load balancer and mapped with an untrust interface on the firewall with my private IPv6 range fd6e:8b94:25ca:b001::/64, and on trust interface range is fd6e:8b94:25ca:b002::/64.

my untrust interface ip is fd6e:8b94:25ca:b001::4/64 and trust interface ip is fd6e:8b94:25ca:b002::4/64 and my vnet for servers are in fc00:8b94:25ca:b002::/64.

I created a virtual router with default routes ::/0, security policy but then also I am unable to ping google IPV6 address from my firewall trust or untrust interface.

can anyone help me out what is the minimum IPv6 configuration that need to be done on the firewall in order to get internet.



Please note you are posting a public message where community members and experts can provide assistance. Sharing private information such as serial numbers or company information is not recommended.
1 REPLY 1

L1 Bithead

Any solution? 

  • 2603 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!