Unable to connect log collector to panorama

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Unable to connect log collector to panorama

L0 Member

I have a panorama VM running on Azure, I am currently trying to bring up some log collector VMs also on azure to handle the logs of my firewalls.

 

I have been able to deploy the log collectors, but when I add the log collector to the panorama through the "Managed collectors" section, I do not get any connection status, the connection status is just blank.

 

I can ping the IP of the log collector from the panorama and vice-versa, but I am unable to connect the log collector to the panorama.

 

On checking the mp.logs of the log collector, i see this error - 

Error: pan_cmsa_tcp_channel_setup(src_panos/cms_agent.c:1196): panorama agent: SSL connect error. sock=16 err=1

 

On checking the panorama-status on the log collector, the panorama connected state is "No"

 

Kindly let me know if you have seen something similar and how you fixed it.

 

1 REPLY 1

Cyber Elite
Cyber Elite

Thank you for the post @BabajideM

 

could you check below points:

 

1.) Make sure that Log Collector's serial number and password in Panorama under Managed Log Collectors are correct.

2.) Make sure that PAN-OS of Log Collector is the same or lower than the one running on Panorama.

3.) I would also make sure that log collector is configured to use the same time zone as Panorama and that DNS server is configured:

     set deviceconfig system timezone <Time Zone>
     set deviceconfig system dns-setting servers primary <IP address> secondary <IP address>

4.) Make sure log collector is added to log collector group and push the configuration to log collector group by: Commit > Push to Devices > Collector Groups > [Log Collector name].

5.) Make sure that App content version installed on Log Collector is the same as the one on Panorama.

6.) On Panorama side, I would check the output from: show netstat numeric yes | match 3978

     Could you also take packet capture on Panorama side? You can use Log Collector's IP address as a filter. Make sure that TCP 3978 between Panorama and Log Collector are open.

 

Kind Regards

Pavel

Help the community: Like helpful comments and mark solutions.
  • 5190 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!