Configuring multiple RADIUS servers in vault

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Welcome Idira to LIVEcommunity!

Our community just got stronger! Explore new identity security resources, connect with experts, and discover more ways to learn and collaborate.

Meet Idira

Workforce Identity Articles
2 min read
L3 Networker
No ratings
 How to configure multiple RADIUS servers on a vault?

Steps

This is a common use case, as customers will have a primary and secondary RADIUS server. The general syntax that is required in the vault's DBParm.ini file is:
RadiusServersInfo=<Radius Server IP>;<port>;<vault hostname>;RadiusSecret.dat

This is assuming that the radius shared secret was created using the CAVaultManager command(see the installation guide). The above line will add one RADIUS server.

To add another RADIUS server, simply:
RadiusServersInfo=<Radius Server IP1>;<port1>;<vault hostname1>;RadiusSecret.dat,<Radius Server IP2>;<port2>;<vault hostname2>;RadiusSecret.dat
 
Note that a PrivateArk Server services restart (red light followed by green light) is required to activate any changes to DBParm.ini.  In a standalone Vault, restart ENE service after restarting PrivateArk Server.  In HA cluster, the change must be made in each nodes' respective dbparm.ini. The node switchover should be performed to activate the change.  
 
For more details, see documentation at:
Q: 
How to configure multiple RADIUS servers on a vault?
 
A: 
This is a common use case, as customers will have a primary and secondary RADIUS servers. The general syntax that is required in the vault's DBParm.ini file is:
 
RadiusServersInfo=<Radius Server IP>;<port>;<vault hostname>;RadiusSecret.dat
 
This is assuming that the radius shared secret was created using the CAVaultManager command (see the installation guide).
 
The above line will add one RADIUS server. To add another RADIUS server, simply:
 
RadiusServersInfo=<Radius Server IP1>;<port1>;<vault hostname1>;RadiusSecret.dat,<Radius Server IP2>;<port2>;<vault hostname2>;RadiusSecret.dat
Rate this article:
  • 4133 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎03-24-2026 11:58 AM
Updated by: