Per host QoS

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Per host QoS

Not applicable

Hi there.

I've played with different QoS setups. And currently I'm trying to set up a per host based QoS or BW shaping.

My QoS profile is as following:

Class 3, Min BW: 2Mb/s MaxBW:3Mb/s

Class 4, Min BW: 1Mb/s MaxBW:2Mb/s

QoS policy is:

#1 SrcZone: Inside, SrcAddress:<host_object1>, SrcUser:any, DstZone:Outside, DstAddress:any, Application:any, Service:any,Class:3

#2 SrcZone: Inside, SrcAddress:<host_object2>, SrcUser:any,  DstZone:Outside, DstAddress:any, Application:any, Service:any,Class:4

However, with this setup, only QoS policy #1 is triggered. Am I on the wrong track here?

Also if someone has any directions in how to solve a Per host traffic shaping - that would be awesome Smiley Happy

4 REPLIES 4

Not applicable

A little update:

On my initial test, I made two addresses group:

#1. address1, ip/netmask 172.16.71.10/24

#2. address2, ip/netmask 172.16.71.11/24

However, this seems to take the whole netrange (172.16.71.0 - 254) and specifying the objects without a netmask solves my issue.

L6 Presenter

one thing to consider: by default all traffic passing through the Palo Alto Networks device will be in class 4. You may want to modify your policy to use a different class so that we can differentiate between the traffic you want to shape and the rest of the traffic that does not require any special QoS shaping.

-Benjamin

So if i leave class 4 blank, any traffic not triggering other classes of QoS will not be shaped in any way?

No shaping on class 4 traffic unless you say otherwise. In short and to answer your question, the answer is no.

  • 3467 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!