Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Pinging issues after installing cortex

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Pinging issues after installing cortex

L2 Linker

After installation of Cortex, we have not received Ping response from basic applications. Could this be because of cortex?   

1 accepted solution

Accepted Solutions

L5 Sessionator

Hi @Aiman_Fathima ,

 

Thank you for reaching out to live community!

 

 It would be very difficult to say just by the behaviour. You can try to disable Cortex XDR protection on the endpoint and observe if the issue is reproduced. On the Cortex XDR endpoint administration, select the endpoint you are facing issue with and right click on the endpoint>Endpoint Control> Pause Endpoint Protection . Once the endpoint protection is paused, you can try reproducing the issue, If the issue is observed again, then it is isolated that Cortex should not be the root cause of the issue. 

 

If the issue is not observed after pausing the protection/disabling agent service completely, we would request you to engage our Palo Alto Networks Technical Assistance Center by opening a case and troubleshooting further.

 

Hope this helps!

 

Best Regards

View solution in original post

2 REPLIES 2

L5 Sessionator

Hi @Aiman_Fathima ,

 

Thank you for reaching out to live community!

 

 It would be very difficult to say just by the behaviour. You can try to disable Cortex XDR protection on the endpoint and observe if the issue is reproduced. On the Cortex XDR endpoint administration, select the endpoint you are facing issue with and right click on the endpoint>Endpoint Control> Pause Endpoint Protection . Once the endpoint protection is paused, you can try reproducing the issue, If the issue is observed again, then it is isolated that Cortex should not be the root cause of the issue. 

 

If the issue is not observed after pausing the protection/disabling agent service completely, we would request you to engage our Palo Alto Networks Technical Assistance Center by opening a case and troubleshooting further.

 

Hope this helps!

 

Best Regards

Thank you for your suggestion. 

  • 1 accepted solution
  • 1757 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!