08-26-2024 12:38 PM
hi! i expermiented a rare problem in my xsoar dev, in there i have 0 jobs, 0 integration active, 0 incidents creation, 0 everything. But every 15 minutes, the cpu% increases to 50 for about 5 minutes, then to 0. The last change i've made is to configure the syslog to a host, but for this task, i followed step by step the official XSOAR documentation (https://docs-cortex.paloaltonetworks.com/r/Cortex-XSOAR/6.5/Cortex-XSOAR-Administrator-Guide/Send-th...).
08-27-2024 11:29 AM
two months ago i pass from 6.10 to 6.12
09-03-2024 05:26 AM
Hello! Are you running RHEL version 8 or higher? If RHEL, I have seen cases where Podman containers can get stuck and a "podman system reset" can help. I would recommend backing up and custom podman container images prior to this, though, as it will remove them.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
