Applications/executables report

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Applications/executables report

L4 Transporter

I feel like I should know this, but here it goes. We're still in EPM QuickStart, and have been capturing Policy Audit information for several months. Before we start the exercise of turning this data into policy, we'd first like to go to our various teams to find out why certain applications aren't already packaged for delivery (example: SSMS), and what applications should even be approved/not approved for use, ... this type of information. We are not at the table, in regards to any of the current software-related processes. Any recommendations for a canned report, or policy filter, would be much appreciated. Thank you.

 

1 accepted solution

Accepted Solutions

If you go into Reports, then define a Policy Audit Details report does that give you the info you need? Again, you'll probably need to do some filtering in Excel, but if you have the Quickstart policies Audit set to On then the Policy Audit Details report should be able to capture everything that gets covered by them.

View solution in original post

7 REPLIES 7

L4 Transporter

As an example, I'm trying to show 59 people installed SSMS v2, 71 people v3, 112 people Visual Studio xyz, 29 ran softwaresetupxyz.exe signed by Microsoft - every application and/or executable we've captured.

L4 Transporter

@Todd Sherwin​ , You can run use the Application Catalog to get that kind of report (or an Application Catalog report in Reports). If you use the Application Catalog I believe it will give you total computer counts for each version, but it won't tell you which computers it's on. If you use the Application Catalog report in Reports you can get the list of computers, but will need to do some filtering with Excel probably to get exactly what you want.

 

I honestly have not done this exact thing myself, but I've played with it a little and believe it might give you what you're looking for. Good luck!

L3 Networker

Hello @Todd Sherwin​ 

I'm not sure I follow the question. do you mean to ask "how do I see the details of the installed applications?" if so, Reports/ Application Catalog(or with details).

If your question is other, please elaborate.

 

thanks,

 

L4 Transporter

Sorry. We're only interested in determining what folks have installed via EPM elevation while we are in Quickstart. We are not scanning workstations as we're not interested in what is already installed and/or pushed through SCCM. We will be turning the Policy Audit events into actual policies, but before that, need to take an executive summary to other teams to give them an idea of the applications (and number of installs) that we're seeing. For example: over the last 90 days, x number of people installed SSMS. Why is this not packaged? y number of people installed Visual Studio. Same question. z number of people ran software_install.exe signed by whomever - is this actually even approved and should we block? Looking for a report we can share with these external teams. Thank you.

If you go into Reports, then define a Policy Audit Details report does that give you the info you need? Again, you'll probably need to do some filtering in Excel, but if you have the Quickstart policies Audit set to On then the Policy Audit Details report should be able to capture everything that gets covered by them.

Thanks @Ron Martin​ that is correct!

I think this will get us what we need. Thank you.
  • 1 accepted solution
  • 7 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!