Endpoint Privilege Manager (EPM) Articles
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Question FAQ about the Endpoint Privilege Manager / Viewfinity Outlook Plugin / Addin. Answer Q. What versions of Outlook are Supported? A. From MS Outlook 2010 (14.0.4763.1000) and up  Q. What is the name of the plugin and where is it located?  A. The plugin is called vf_bho.dll and located at C:\Program Files\CyberArk\Endpoint Privilege Manager\Agent\x32\vf_bho.dll  Q. What is it used for? A. When loaded and enabled, the plugin gathers source data on files which may have arrived to the endpoint via email. Example - a .pdf or .xls which was sent by [email protected] can gather this specific address as part of the timeline and file source data visible via the manager. Q. How can its behaviour be affected from the EPM Manager UI? A. From the vfmain page of the manager UI > Advanced > Agent Settings > Discover Source Email > Change flag to "Off" or "On" and save. - This will cause the add-on to watch for and gather this information as part of the file source information or not. Q. What is the corresponding line in the vf_policies.xml to check? A. <DiscoverSourceEmail>True</DiscoverSourceEmail> A2. When false this line is simply missing from the file. Note - Disabling this configuration will not prevent the plugin from being loaded into Outlook. But it will disable any functionality. Clients will still see the "Viewfinity Outlook Add-in" in the list, but it will not be listening or gathering any information. Q. What is the use of the same dll, when used as the add in for Internet Explorer? A. For the EPM add-on for Internet Explorer, this allows ActiveX controls to be elevated or blocked by EPM. Q. Can I disable it from even loading into Outlook? A. While this is an unnecessary step, it is possible via changing the following 2 registry entries -  1. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\Viewfinity.OutlookAddin 2. * Only if you are running a 64-bit verison of Windows * you will also need to look in HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\ Office\Outlook\Addins\Viewfinity.OutlookAddin 3. Look at all subkeys of Addins. Those are Add-ins you have installed. To disable a particular Add-in, set its “LoadBehavior” key to 0 4. Do not forget to restart Outlook after making these changes
View full article
Using both a proxy and a direct connectivity on the same Endpoint may cause connectivity issues. Steps If a proxy is required for EPM Agents to communicate with the Server, a well-structured Proxy Auto-Config (PAC) file is essential to avoid routing conflicts. The PAC file is used to route only traffic containing "CYBERARK_AGENT" through the proxy, while all other traffic goes direct. This selective routing ensures that only essential traffic is proxied, minimizing the risk of interference.   Ensure that: PAC files are clearly scoped to route only necessary traffic. Proxy credentials are correctly configured and tested. Registry entries like  DispatcherURL  and  ProxyScript  are validated. Test both proxy and direct paths independently to isolate failures.
View full article
Question Why "FILEOPEN: BLOCKED" Actions do not Trigger a Dialog when a policy is applied? Answer When the  FILEOPEN: BLOCKED  action is triggered, no dialog is shown. This is by design to avoid overwhelming users with unnecessary prompts, ensuring a cleaner and more focused experience. A dialog will still be displayed when a process start is blocked, as expected.
View full article
Question What are the custom role permissions needed to see the Policy Audit options in a policy? Answer First, note that you must have this option enabled in Agent Configuration Settings: Collect policy audit data   How to verify the custom role has the correct permissions Log into the EPM console as a full control account admin Management Options > Administration > Role Management Select Role the custom role In the advanced section of the role, check box for "View Agent Configuration" Save role   
View full article
Create an Advanced Policy for MacOS to Elevate and add 3 sudo definitions in the same policy to capture and elevate all sudo command variations. Steps Application Definition 1: - Command - matches wildcard - * Application definition 2: - Command - matches wildcard - * - Sudo arguments - matches wildcard - * Application definition 3: - Command - matches wildcard - * - Sudo arguments - match wildcard - * - Parameters - match wildcard - *   In those 3 cases, you will always get elevated for whatever sudo command you run and however you structure the command.  
View full article
Question When the user attempts to execute a .ps1 on Script Distribution Policy. EPM will execute the "powershell.exe" while appending the following command to run the script: -Command if((Get-ExecutionPolicy ) -ne 'AllSigned') { Set-ExecutionPolicy -Scope Process Bypass -Force};  Why did EPM Agent execute the script with the above command? Answer When the machine's Script Execution policy is set to "AllSigned", PowerShell requires that all scripts (including those deployed by EPM) must be digitally signed by a trusted publisher. Next, when "AllSigned" is enforced as the script execution policy, PowerShell blocks any unsigned scripts from running — even if its triggered by EPM  EPM’s Script Distribution Policies are designed to work under standard execution policies (e.g., "Bypass", "RemoteSigned", etc.), which is why EPM is appending the command when executing .ps1 script
View full article
Question When a process launch is handled by a policy with the "scheduled enforcement"  option enabled, will that process be automatically be terminated at the end of the policy enforcement period?   Answer No, the "Scheduled enforcement" option does not cause any processes to be terminated when the end time is reached. This policy option simply adds an extra factor to determine if the policy will apply (or not apply) when a process is launched.
View full article
Question There are different redirect URIs for desktop and web applications when registering an application in Azure Active Directory (AAD). Here's a breakdown: Answer Web Applications: In web applications, the redirect URI specifies the web page where the authorization server (Azure AD) will send the user after successful authentication. This URI typically points to your web application's login or authorization callback endpoint. Desktop Applications: Desktop applications often use a different approach. There are two main scenarios: Embedded Browser: In EPM, we use an embedded browser to enable step-up authentication. Therefore, it is known that desktop apps cannot be used as conditional policy. The URI should be categorized under the Desktop app category. Custom Browser Handling: Custom browser handling is currently not supported.
View full article
Question 1. How does the "Server" service help perform Credentials Rotation at endpoints? 2. Are there any other service dependencies for the "Server" service? 3. Can we run the "Server" service by a specific user other than the system account? If yes, are there any known issues? 4. What are the specific risks in the Credentials Rotation process if we keep the "Server" service in a disabled state?   Answer The "Server" service plays a crucial role in the Credentials Rotation process by supporting file, print, and named-pipe sharing over the network. This enables the Endpoint Privilege Manager (EPM) agent to communicate effectively with the Privileged Vault Web Access (PVWA) server, ensuring that credentials can be rotated as required. No, to enable the Loosely Connected Devices (LCD) feature, you only need to start the "Server," "vf_agent," and "PasAgent" services. These services work together to ensure proper functionality and communication between the EPM agent and the PVWA server. The "Server" service runs as a Local System Account by default. While it is technically possible to run the service under a specific user account, it is not recommended. Changing the user might cause communication errors between the EPM agent and the PVWA server. This could lead to disruptions in the Credentials Rotation process and other network functions. Disabling the "Server" service can pose significant risks to the Credentials Rotation process. The LCD feature might not work, leading to potential security vulnerabilities. Additionally, any services that explicitly depend on the "Server" service will fail to start, which can disrupt communication between the EPM agent and the PVWA server. This can increase the risk of unauthorized access and data breaches.
View full article
Question If I look in the Endpoints (Beta) "Users in Local Administrators Group"  report or I look the details of the computer in the Endpoints (Beta) user interface, why can't I find information about domain users or domain groups in the local administrators group? Answer If you go into the Endpoints (Beta) pane in the EPM console and browse to the endpoint, double click it, and look in Local Users and Groups, it is only intended to show local users and group.  It is not intended to show domain users or domain groups.     The Endpoints (Beta)  "Users in Local Administrators Group"  report is not intended to show domain users or domain groups
View full article
If a client needs to remove old agents, they do not require the MSI file. The uninstall command can use the product key instead.     The product key can be found in:  Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall Steps Look for the key that includes "CyberArk" or "Viewfinity Agent" (the agent must be installed). Once you find the key, locate the  UninstallString  value. Copy the value from the registry. In the command line for Agent uninstallation, replace  /I  with  /x . The  /I  parameter is used for installation, while the  /x  parameter is used for uninstallation. For example: Original:  MsiExec.exe /I{6649C273-E7F6-48A4-9002-20C692B36AFB} Modified:  MsiExec.exe /x{6649C273-E7F6-48A4-9002-20C692B36AFB} Add  /qn  for a silent uninstall via SCCM. For example, the final command line will be:  MsiExec.exe /x{6649C273-E7F6-48A4-9002-20C692B36AFB} /qn   Follow this link for EPM Agent Product Codes: https://community.cyberark.com/s/article/EPM-Agent-Product-Codes   Command Lines for Requested Versions (for example): Version 11.5.6:  MsiExec.exe /x{6E572D78-5295-4CA2-8815-3695DDFF47B3} /qn Version 11.5.5:  MsiExec.exe /x{F6593DD5-8039-418F-87C6-712375E55364} /qn Version 11.5.3:  MsiExec.exe /x{6649C273-E7F6-48A4-9002-20C692B36AFB} /qn
View full article
Question Which EPM Administrative tasks are required to display the EPM Control Panel? Answer To enable the EPM Control Panel, follow these steps: Enable via Agent Configuration Navigate to the agent configuration settings and activate the EPM Control Panel   Enable One of the Following Options Choose at least one of the following policies: Create a Distribution Policy Set up a distribution policy as shown below   Modify the Default Policy In the default policy, enable the option "Allow end users to submit elevation requests"   Create an Elevate or Normal Run Policy for the task "Add/Remove Printers"   Create an Elevate or Normal Run Policy for the task "Network Configuration"  
View full article
Question Why can the EPM Linux Agent collect inventory for some users and rotate passwords for some users, but it doesn't perform those functions for other users? Answer The EPM agent checks the file /etc/login.defs and gets the UID_MIN and UID_MAX settings from that file.   The EPM agent will only inventory users, or perform LCD rotation for users, which a uid in that falls between UID_MIN and UID_MAX  IMPORTANT: This information doesn't apply to root How to confirm if this scenario is affecting inventorying or LCD rotation on an endpoint: Check the /etc/login.defs file on your endpoint to determine what the UID_MIN and UID_MAX settings are. cat /etc/login.defs|grep UID_MIN cat /etc/login.defs|grep UID_MAX   Check the uid for the problem user by running this command (replace <username> with actual username id <username>   If UID_MIN is greater than the uid of the user, the EPM agent may not inventory that user or perform LCD rotation for that user If UID_MAX is lesser than the uid of the user, the EPM agent may not inventory that user or perform LCD rotation for that user   IMPORTANT: This information doesn't apply to root
View full article
1.  Functionality of "Application access control" When an policy handles an application and that policy has "Application access control" enabled, EPM may block that applications ability to modify certain files. Dependent on how you have the "Application access control" option configured, the end user may or may not see an EPM dialog when the restriction happens.  Also dependent on the option configuration, the EPM admin may or may not see an event in the EPM Console.     Steps 2. "Application access control" option in EPM Advanced Policy In an advanced policy, you can go to options and turn on "Application access control"  After doing so, you can restrict access to a specific location or file.  This means that  applications or scripts handled by the policy will be restricted from making changes to the files you specify. If you want end user to see a EPM "Restricted access" dialog, you can configure the dialog in the options:       3. vf_policies.xml example when "Application access control" option is enabled If you see RestrictionRule id= in a policy it means that in the policy you have an "Application access control" option defined.  You can take that restriction rule id (shown bold below)…   <Policy id="147888" order="440" action="4" name="pol 4 - restriction test" reportUsage="2" replaceUAC="True" replaceAdminUAC="True" shellExtension="False" restrictionId="{e0bfada7-798b-493e-bb1f-1f2b7974049d}" internalType="3"> <Alert type="Dialog" id="{21589654-1fac-4456-8b34-7d7833a0fbd8}" trigger="23"/> <Targets> <ApplicationGroup id="{698b4330-15e3-476c-8208-cab25a9107ae}"/> </Targets> </Policy>   … and if you search for it you'll find the details later in the policy xml…   <RestrictionRule id="{e0bfada7-798b-493e-bb1f-1f2b7974049d}" name=""> <RstrPath id="{b33e4067-8f66-4524-b49c-9481efafeca4}" allow="False" showDlg="True" restrEvent="True" order="0" isFile="True">test.txt</RstrPath> </RstrPaths> <RstrKeys id="{12b641bb-a4e6-49c9-a740-972ff4b22676}"/> <NetShares id="{4ff442aa-f6d8-4810-b4ee-e42eadb8a4ce}" restrEvent="True"/> <RstrNetworks internetId="{3447d57d-e9c1-4e72-8eff-a63b54519844}" restrEventInternet="True" intranetId="{f355040f-e870-475f-b80f-82f16f44fbf9}" restrEventIntranet="True"/> </RestrictionRule>     4. vf_agent_srv.trace log example when the policy blocks access 2025.01.07 20:54:01 PID:3384 TID:5452 CvfAnswerRtEvents::SendData: INFO: Sending 1 run-time events of type RestrAccessEvent. First event extended info: <RestrAccessEvent targetType="4" owner="SUPPORTLAB\Administrator" publisherStatus="1" timeFirst="133807568379028951" timeLast="133807568379028951" count="1" policyId="147902" policyAction="1" targetId="{B9B1BCA7-37F4-437A-A611-DA7AA6C91572}" userIsAdmin="true" user="SUPPORTLAB\Administrator" id="{b33e4067-8f66-4524-b49c-9481efafeca4}" zeroTouch="false" fullTrace="false" allowed="false" accessTargetType="1" pid="9064" procStartTime="133807568328060785"><AccessTarget>C:\Users\administrator\Desktop\test.txt</AccessTarget><Description>test.bat</Description><Hash>SHA1##012FFB513CF7503ADC05E0AA891FE96CB7CB4ECB</Hash><Path>C:\Users\administrator\Desktop\test.bat</Path><LocType>FIXED</LocType><Size>51</Size><ModifTime>133807528606740721</ModifTime><PolicyName>access control test</PolicyName><FileOrigin>&lt;FileOrigin version="1"&gt;&lt;Installer installTime="133807528606896840"&gt;&lt;Process order="0" publisher="Microsoft Corporation" publisherStatus="4" hash="8559908BE6C729D0BA17021725931B17CA3D9A1B" hashAlgorithm="SHA1"&gt;&lt;Path locationType="FIXED"&gt;C:\Program Files\WindowsApps\Microsoft.WindowsNotepad_11.2410.21.0_x64__8wekyb3d8bbwe\AppxManifest.xml&lt;/Path&gt;&lt;Args&gt;"C:\Program Files\WindowsApps\Microsoft.WindowsNotepad_11.2410.21.0_x64__8wekyb3d8bbwe\Notepad\Notepad.exe" &lt;/Args&gt;&lt;User sid="S-1-5-21-279092831-2758002539-1835282715-500" name="SUPPORTLAB\Administrator" limited="true"&gt;&lt;Group sid="S-1-5-32-544"/&gt;&lt;Group sid="S-1-18-1"/&gt;&lt;Group sid="S-1-5-21-279092831-2758002539-1835282715-512"/&gt;&lt;Group sid="S-1-5-21-279092831-2758002539-1835282715-513"/&gt;&lt;Group sid="S-1-5-21-279092831-2758002539-1835282715-8609"/&gt;&lt;Group sid="S-1-5-21-279092831-2758002539-1835282715-518"/&gt;&lt;Group sid="S-1-5-21-279092831-2758002539-1835282715-519"/&gt;&lt;Group sid="S-1-5-21-279092831-2758002539-1835282715-520"/&gt;&lt;Group sid="S-1-5-21-279092831-2758002539-1835282715-572"/&gt;&lt;/User&gt;&lt;/Process&gt;&lt;Process order="1" wellKnown="explorer"/&gt;&lt;/Installer&gt;&lt;/FileOrigin&gt;</FileOrigin></RestrAccessEvent>     5. How to monitor events in EPM console Enable Policy Audit in the policy.  then you can look in "Policy Audit" in the EPM console and you should be able to see an event with event type of "Access restricted".    6. How to reproduce or demonstrate in lab Create test.bat on the desktop.  The contents of this script should be just one line: echo %date% %time%>%userprofile%\desktop\test.txt Create a policy with the action being elevate if necessary. Add a "script" definition for test.bat Update policies on the endpoint run test.bat on the endpoint.  You should notice that it updates test.txt with a timestamp. Now edit the policy and go to options and then "Application access control".    Set it to "On".  In the Resources section click Edit next to "Files on the local disk".  Add filename test.txt.  Click done.  Set "Notify end users" to use am EPM dialog.  In the "Audit section of the policy, enable policy audit.  Save the policy changes. On the endpoint, request policies. launch test.bat again.  You should now get a restricted access EPM dialog, and it should NOT write anything to test.txt If you get SupportInfo logs and look in the trace subfolder, then vf_agent_srv.trace, search for RestrAccessEvent If you enable DemoMode and check Policy Audit in the EPM Console, you should see an event with event type of "Access restricted".
View full article
Question If EPM is installed and the user is a standard (non-admin) user, what is the recommended method to upgrade the Mac operating system to Sequoia? Answer Do not have any EPM policy applying to the Mac upgrade process Use an EPM Just in Time (JIT) policy to temporarily add the user to the admin group Instruct the user to use this method for upgrading the operating system
View full article
Question I have selected an OU populated with objects within DNA to scan however it does not show any accounts are available to scan, why?   Answer DNA filters objects that are not defined as computers.  1. Check if the server's object type is defined as "computer"? You can see it in the "type" column in ADUC. 2. Another option might be that the servers are domain controllers, which cannot be scanned with DNA.  Q:  I have slected an OU populated with objects within DNA to scan however it does not show any accounts are available to scan, why? A:  DNA filters objects that are not defined as computers.  1. Check if the server's object type is defined as "computer"? You can see it in the "type" column in ADUC. 2. Another option might be that the servers are domain controllers, which cannot be scanned with DNA. 
View full article
Question What is the purpose of EPM Agent? Answer 1)Communicate with EPM server for Registration,inventory,Events,Policies and commands 2)Downloads the policies from EPM Server. 3)Enforce policies on end machine. 4)If the agent was installed successfully, machines will start to appear in My Computers to apply filters and group by OU. 5)It has built in agent self-defense. 6)Agent helps to get support info for troubleshooting 7)Agent elevate the components such as dllhost,svchost and com Object as per policy. 8)Agents helps to pop up dialogs on screen.   Issue Hi Team. An inquiry has come from a customer. The customer installed EPM Agent on a Windows PC. And I checked the Users tab of Task Manager. The user is confirmed to be using "CyberArk EPM UI Host". So, the customer inquired about the role of "CyberArk EPM UI Host". Thank you. Best Regards. Environment Windows Agent (Server) Performance
View full article
Problem: Often times, when building out your policies in an attempt to fully understand what each files execution does, we’ll need to first understand if our definitions will take effect as we think.  Sure, you could just do simple trial and error, but that adds a significant amount of overhead that could be avoided. Solution: For cases where you need to see actively executed files, use vfagent.exe -ShowProcInfo.  Since this particular command needs to be run as admin, it’s best to deploy this as a batch or cmd file to be executed from the EPM Control Panel.   Steps   Enable EPM Control Panel in Agent Configuration Create Create batch or CMD file with the exact command needing to be executed  "C:\Program Files\CyberArk\Endpoint Privilege Manager\Agent\vf_agent.exe" -ShowProcInfo           3. In EPM Console, create EPM Script Distribution Policy Practical Use Screenshot:
View full article
Problem: Collecting relevant logs and providing sufficient detail can be challenging when trying to identify if there’s an issue with a solution or simply how its configured.   Please don’t open a support case without providing Get Support Info at minimum (in most cases this should be possible) Solution: Utilize Get Support Info   Steps Screenshot (Windows): Screenshot (MacOS):
View full article
Problem: With an assume breach mindset, we should be employing defense-in-depth strategies to protect our security tools.  The power gained by reconnaissance of EPM’s agent logs can be quite impactful for an attacker. Solution: Protect the agent logs with a password that also enables encryption of the logs   Steps   Under Advanced > Agent Configuration, click the elipses next to General Configuration (or applicable custom configuration) Click the elipses next to “Support info file password”, select edit Using a password management solution, generate a long, complex password, store it, then click save.  
View full article
Problem: When working on EPM policies you may have a need to modify your targets such as adding additional computers to your policies for example.  Best practice is to target your AD Computer Security Groups in your policies when possible.  However, when computers are added in AD, it could take up to 24 hours for the modified EPM policies to recognize those newly added computers. Solution:  Introduced in EPM v23.6, you will be able to refresh the AD computer groups cache immediately without having to wait the 24 hour period.  This will allow you to update and deploy your policies much more quickly and ensure any newly added computers are included. Steps In the following example, we have an EPM policy with a Target to an AD security group called “DemoSecGroup”. We have just added a few computers to the “DemoSecGroup” security group and would like to refresh the AD computers group cache proactively.  From a computer that has version 23.6 of the EPM agent or higher, navigate to the below path and run the command “vf_agent.exe -RefreshCache AD”.  The refresh process could take a few minutes to complete.  Another option to trigger this command is by using the “Request Settings” item in the pop-up menu from the EPM tray icon.
View full article
What is the purpose of ShowProcInfo Utility and how do I use it? It shows a dialog with a list of currently running processes. For each process, the command shows all available properties, including information about the process (process ID, session ID, command line, and so on), image file (owner, publisher, checksum, and so on), token (user name, user id, and so on) and any applied policies. Steps 1. Run command prompt as administrator and navigate to the EPM Agent folder: 2. Run the following command, the VF Process Info dialog will appear: vf_agent.exe -ShowProcInfo 3. Check the running processes information as well as "Policy applied": Q: How do I use ShowProcInfo Utility? A: ShowProcInfo: Shows a dialog with a list of currently running processes. For each process shows available properties including information about process (process id, session id, command line etc.), image file (owner, publisher, checksum etc.), token (user name, user sid etc.) and applied policies if any. In an elevated command prompt navigate to C:\Program Files\Cyberark\Endpoint Privilege Manager\Agent Syntax: vf_agent.exe -ShowProcInfo Examples: vf_agent.exe -ShowProcInfo Shows running processes information as well as "Policy applied"
View full article
*Only in Ubuntu machines* If we don't set default root user password, during initial setup, these steps can be taken to set/update password of the root user.   Issue In few ubuntu machines, If we don't set default root user password, during initial setup, these steps can be taken to set/update password of the root user. Environment Linux Agent (Workstation) Policies: Advanced Cause In few ubuntu machines, If we don't set default root user password, during initial setup, these steps can be taken to set/update password of the root user. Resolution In few ubuntu machines, If we don't set default root user password, during initial setup, these steps can be taken to set/update password of the root user. sudo passwd root Steps 1.Open terminal. 2.Please run below command. sudo passwd root 3.Once password has been set, this will be root user password.
View full article
The specified steps describes: 1. Helpful information required to open a Support ticket.  Issue How to gather required logs for Linux Agent Environment Linux Agent (Workstation) Policies: Advanced Cause How to gather required logs for Linux Agent Resolution These are the logs required to verify the issue with commands in Linux. 1.epm log /var/opt/cyberark/epm/logs/epm.log   2.Preloader command. echo 4 > /var/opt/cyberark/epm/.tracesudo echo 4 > /var/opt/cyberark/epm/.tracepreloader   3.Then run again the problem, after this fails, please gather Support info logs after you execute this command. /opt/cyberark/epm/bin/epmcli --get-support-info Steps These logs required to verify the issue with commands in Linux 1.epm log /var/opt/cyberark/epm/logs/epm.log   2.Preloader command. echo 4 > /var/opt/cyberark/epm/.tracesudo echo 4 > /var/opt/cyberark/epm/.tracepreloader   3.Then run again the problem, after this fails, please gather Support info logs after you execute this command. /opt/cyberark/epm/bin/epmcli --get-support-info  
View full article
Question What happens to EPM Agent Secure Tokens when turning off agent self-defense? Answer Anytime that EPM Agent self-defense is turned off, any and all tokens previously generated will be immediately invalidated for all 'Alive' endpoints.  Disconnected devices will continue to utilize old, invalidated tokens until they come online and receive the latest set of policies from the EPM server. This means that if over the course of troubleshooting, self-defense is turned off and back on, ANY previously generated tokens are invalidated and will need to be re-issued for 'Alive' endpoints.  Disconnected devices will continue to utilize old, invalidated tokens until they come online and receive the latest set of policies from the EPM server.  Commonly, this also means that any tokens generated with a validity period if 'Never', commonly used with Software Distribution systems such as SCCM, Intune, and JAMF, will also be invalidated and need to be re-issued.
View full article
Problem: Once default policies are enabled on an existing set in EPM, you are not able to activate QuickStart. You may be inclined to create a new set, activate QuickStart, and export the QuickStart policies to your production set.  However, there is an even better solution to solve this issue. Solution: The quickest way to restore the Activate QuickStart option is to toggle all your default policies off, activate QuickStart, and then reenable your default policies. Steps The QuickStart activation option is available under Policies > Policies Recommendations in the EPM console for your set. This option disappears when any of the Privilege Management settings are turned on.  You can verify this by going to Policies > Default Policies If you have any of these settings turned on, toggle all to off then click on Policy Recommendations again where the Activate QuickStart option should be available.  Proceed with activation of QuickStart and then you can return back to Default Policies to turn those default policies back on.
View full article
Problem: When working on EPM policies, you will routinely need to evaluate unhandled events that appear in the Events Management inbox. This is especially true during the early discovery phase of your EPM deployment when elevation request events need to be evaluated. You may be wondering why common applications that you have already whitelisted such as Adobe Acrobat, Google Chrome browser, or Firefox browser are appearing in Events Management as unhandled events. These are likely the auto update child processes for these common applications. Left unmanaged, these events will flood your Events Management inbox and cause a lot of noise. Your first inclination may be to create an advanced policy for each of these updater elevation requests but there is a more effective solution. Solution: Instead of creating another advanced policy that will need to maintaned, consider using a predefined software updater trust policy to handle these common applications Steps From the EPM console, navigate to your set and click on Policies on the left pane.  Click on the ellipsis next to Create advanced policy on the right pane to create a trust policy. In the Create trust policy application policy setup window change Type to Software updater and click on Continue. Next make sure Predefined is selected and click on the Select button to choose a predefined application to create a trust policy for.  In the below example, we have chosen Adobe Acrobat.  Provide an appropriate name and description for the policy. Click Create at the bottom of the page to complete the policy creation. Note: This Trust policy applies to all endpoints in the set.  It is advised to test this policy in a different set with a subset of endpoints to ensure this policy fits your needs.
View full article
Question Is there a specific time frame/period where the information of Software inventory will be updated from the endpoint? Answer Currently, the EPM agent does not have the logic to push inventory updates. Using the request settings option will not push inventory updates too. It will only send the inventory information during register attempt to server, which will happen when the EPM agent service is started (such as rebooting machine, restart EPM service, etc).
View full article
Many customers use a remote PowerShell shell to perform actions on endpoints without bothering end users.  Running some EPM commands can be an issue due to the placement of quotation marks.  Here is how to run several commands remotely. Steps 1) Connect to the computer remotely using PowerShell 2) Optional - run this command to get the status of Agent Self Defense before making changes get-service vfpd 3) Try to stop Agent Self Defense with the following command.  Replace the token with your actual token.  Note that double quotation marks "" are needed as shown below: Start-Process cmd -ArgumentList "/C ""C:\Program Files\CyberArk\Endpoint Privilege Manager\agent\vf_agent.exe"" -UseToken 1ABCEXAMPLETOKEN4567891011121314" 4) Optional - run this command to get the status of Agent Self Defense after the stop attempt get-service vfpd if it's still running, that means step 3 failed and you can stop here.  Otherwise proceed below: 5) Run another command to uninstall EPM.  In this example I'm using an example of uninstalling using the GUID for version 23.8.0.1415.  You'll need to either replace the GUID with the GUID for your version, or use the msiexec method that involves using the msiexec file instead Start-Process cmd -ArgumentList "/C MsiExec.exe /x {003B1BE5-373A-49B5-8834-D7B6715EB98B} /qn" 6) You can check the following service to confirm if EPM was removed.  get-service vfdrv
View full article
Problem: Reviewing the Policy Audit and Events Management inboxes to either create or update your existing policies or application groups can be challenging.  Depending on your EPM maturity level, reviewing all the events logged from the EPM console may be a daunting task.  This is where reporting can come in handy by leveraging the predefined reports found in the EPM console! Solution: Depending on what information you are trying to collect from your endpoints, the following are some recommended use cases that may be helpful to you.  There are many possibilities but when you are able to export data out of EPM and into CSV files, there could be some insightful information to be discovered. Steps These are the recommended reports that are available from the EPM console.   Application catalog (Reports > Events type > Application catalog (Predefined)) Provides a list of all applications detected on endpoints with the EPM agent installed.  This information can be used to formulate a block of allow list based on company policy Contains the number of instances a particular application is installed and on how many endpoints.  This is invaluable data to determine how said application should be handled from an execution standpoint (block or allow) Report contains useful application parameters such as location path, file checksum, and if admin rights is required to execute.  These details help fine-tune your policy definitions   Policy audit (Reports > Events type > Policy Audit (Predefined)) If your Policy Audit view from the console is busy and you have many results to evaluate then consider running this report to output into a CSV file Policies can be quickly filtered to identify trends such as application execution behavior or approval requests.  A use case example is evaluating the QuickStart 4.1 policy (also known as the catch all or discovery policy) to evaluate applications being trusted.  The information collected from the report could warrant the need to target another policy for more effective event handling   Endpoints status ( Reports > Endpoints type > Endpoints status summary (Predefined)) Comprehensive report showing the status of all endpoints with the EPM agent installed.  Useful information include agent version installed, agent status (alive/disconnected), and last check-in time with the EPM server   Users in Local Administrators group (Reports > Endpoints type > Users in Local Administrators Group (Predefined)) Depending on your organization’s strategy to remove user accounts from the Local Administrators (LA) groups, this report is useful to assess your overall progress.  Removing LA is not an overnight task and involves careful planning and communication to ensure users can still effectively work This report provides a list of all EPM endpoints and includes the computer names and user names (whether domain or local) who are members of the LA group
View full article
  • 234 Posts
  • 19 Subscriptions
Top Liked Posts in LIVEcommunity Article
Top Liked Authors