Base Configuration[Output] empty

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Base Configuration[Output] empty

L1 Bithead

Hello,

 

i am running an Expedition 1.2.71 intalled on an ubuntu vm. the whole installation followed the instructions.

strangely enough i can't select a device when exporting the config. the whole window is empty

I have created the device, imported the configuration and created the project. 

I have done all the steps as described in the youtube guide. I just have no way to merge the two configurations.

 

Someone an idea?

 

Greetings,

Daniel

1 accepted solution

Accepted Solutions

When you import the pan-os config , did you retrieve the whole running config from the device , and in the import tab, click on the device to import the config ?  After the import , you should see objects and policy under the config name . If you are not seeing the objects and policy that means it's not imported. 

View solution in original post

4 REPLIES 4

L6 Presenter

@DanielEsbach , please expand the down arrow right located left of the base config folder, you should see folder structure of the configuration file.  Sam thing on the left side, you should see folder structure of the source config.  Merged is between 3rd party vendor and PAN-OS only

L1 Bithead

Thanks for your reply. On the left side the Cisco ASA Config is there. On the right side should be the palo conifg three. But unfortunately the field is empty.

 

When you import the pan-os config , did you retrieve the whole running config from the device , and in the import tab, click on the device to import the config ?  After the import , you should see objects and policy under the config name . If you are not seeing the objects and policy that means it's not imported. 

thank you very much. that was it. I had forgotten to press the palo after creating the project. i had only imported the cisco asa config.

  • 1 accepted solution
  • 1707 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!