Expedition csv logs stuck in pending

[joeyjoejoe]

Hi everyone,

I have added firewall logs from our Palo Alto 5000 series to the Expedition VM /PALogs . I have copied the orginal .csv as a duplicate with root as the owner and the original with expedition as the owner. Both files appear in Devices > M.LEARNING. When I run Process Files the job remains in pending and nothing happens. Any ideas what the issue may be?

[PAN-Expert]

Esfeld,

Permissions depend on which directory you use for machine learning and which one for logs. In case they are the same, you would have to change the permissions every time you try to process or SCP. If not then you can make a group and make the group the owner of the directory. 

In order to make them able to just SCP you would run which in turn would make expedition the owner instead of the www-data which is used to process them 

sudo chown -R expedition:expedition PALogs/ 

[joeyjoejoe]

Does anyone have any suggestions? I'm still unable to process the firewall logs and would really like to get this working.

Thanks!

[alestevez]

send me an email to fwmigrate at paloaltonetworks dot com and we can do a Zoom session

[dgildelaig]

If you update to the latest version of Expedition 1.0.98, you will get more information regarding the logs that you are attempting to process.

Things that may occur:

1. The log is incorrectly formated
   • This log won't be able to be pre-processed
2. The log is not supported (PANOS version below 7.1)
   • This log won't be able to be pre-processed
3. The path for MLearning (Main Screen -> Settings -> M.Learning -> Temporary data structure folder PATH) is not a valid path or www-data does not have rights to reaching it and writing inside. Also, this should have been alerted in them main Dashboard HeathChecks
   • We can't pre-process any logs, as we can't write into a folder to store the pre-processing results
4. The logs are way too big for the resources we have provided to Expedition. We should see an error in the file /tmp/error_logCoCo
   • We need to increase the Expedition resources, by adding more RAM and/or CPUs and deleting the file located at /home/userSpace/environmentParameters.php. (This may be optimized in the future to assist on the correct Expedition's resource tunning)
5. The GUI offers you a link to http://<ip>:4050 and this link directs us to a web site that shows some task progress. 
   • All is fine. We need to let it continue until it completes, or fails as in case 4

[Sec101]

How does on upgrade to the latest version?  I've tried the  apt-get update and apt-get expedition beta cmd's and I keep getting the "1.0.8x " is the latest version.  I've tried the unauthenticated -o commands as well, and still can't get the OS to recognize that the install is old.  Any suggestions on upgrading/where to find the latest hotfixes/installs for this?