2 isp 2vr asymmetric

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

2 isp 2vr asymmetric

L6 Presenter

Hi,

2VR 2isp,2 seperate default GW (2 ppoe modems)

PC A ---- internet through ISP 1

we want to RDP TO ISP2's public ip and make destination NAT to PC A

How can we make this work ?

New enforce symmetric return did not work .commit fails with ppoe is not supported error.

1 accepted solution

Accepted Solutions

I found the solution.

Just a pbf for PC A to route for the service used in NAT to VR2's Default gw to ISP2

thanks for your help.

View solution in original post

5 REPLIES 5

L4 Transporter

*Network topology may change this method

If you can burn another port, put an L3 interface in VR2 on the same subnet as PC-A (or what ever subnet other trust interface is on). In the DST NAT rule create a SRC NAT also for the IP of the new L3 interface. Return traffic will come back there and route out VR2.

Thanks,

Dominic

there is only 1 interface for VR2

also there is route for pc A's subnet on VR2

Thanks for advice.

eth1/1 vr1  2.2.2.2 adsl1  dgw 2.2.2.1  WAN1

eth1/2  vr2  3.3.3.3 adsl2  dgw 3.3.3.1  WAN2

eth1/3 LAN 192.168.2.1  vr1

pca 192.168.2.10

pbf 192.168.2.0 route eth1/1 to  2.2.2.1

3.3.3.3 RDP TO PC A

rule

WAN2  WAN2 3.3.3.1/3389  Dest.nat 192.168.2.10/3389

so using eth1/4 vr2 192.168.2.2

wan2 wan2 3.3.3.1/3389  sourcenat interface eth 1/4  dest. 192.168.2.10/3389

is that what you mean ?

Yes, if you SNAT ETH1/4 it return traffic will never hit VR1 and there for route back out ISP2.

Dominic

I found the solution.

Just a pbf for PC A to route for the service used in NAT to VR2's Default gw to ISP2

thanks for your help.

  • 1 accepted solution
  • 2964 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!