3250 HA setup

cancel
Showing results for 
Search instead for 
Did you mean: 

3250 HA setup

L1 Bithead

Hello

I am trying to setup HA on a pair of 3250s and am a little confused between what the datasheet says and what's available. Is there an example out there of how to set the ha1-a and ha1-b ports up. I've only done PA-850s and it appears the 850s have the HA1 and HA2. However, the 3250s have ha1-a being backed up by ha1-b and HSCI as the HA2.

 

I presume I should just use another dedicated fiber port (13-20) as the HSCI HA2 backup?

 

Just looking to verify. Thank you...

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

Hi @jprosso64 

You don't have to use a fiber port for this, it is also possible to use one of the rj45 ports.

View solution in original post

2 REPLIES 2

Cyber Elite
Cyber Elite

Hi @jprosso64 

You don't have to use a fiber port for this, it is also possible to use one of the rj45 ports.

L1 Bithead

Decided to use an extra fiber port since we had many left over. Tried to aggregate a few coppers together but could not get that to work. Thanks for replying.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!