- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
01-07-2014 05:59 AM
Hello
the purpose is to minimze the cpu consomption but in wich way ?
how the offload work exactly?
thank's
01-07-2014 06:22 AM
By default, the PANFW offloads traffic for which it need not perform content and threat checks ( like SSL traffic because its encrypted, and custom applications because the user/admin trusts these applications ). Offloading means that traffic is offloaded to a hardware chip, for faster packet processing. If offloading is set to "no", then all the traffic ( including the custom application traffic and encrypted traffic ) are subjected to signature checks, and it can cause unnecessary usage of CPU cycles.
01-07-2014 06:08 AM - last edited on 10-06-2020 09:04 AM by jdelio
The following article has the information about disabling the offload traffic:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm8cCAC
01-07-2014 06:19 AM
hi
Yes it's explain when the session is offloaded
but it didn't explain how the session is offloaded, i would like some detail on it.
thank's
01-07-2014 06:22 AM
By default, the PANFW offloads traffic for which it need not perform content and threat checks ( like SSL traffic because its encrypted, and custom applications because the user/admin trusts these applications ). Offloading means that traffic is offloaded to a hardware chip, for faster packet processing. If offloading is set to "no", then all the traffic ( including the custom application traffic and encrypted traffic ) are subjected to signature checks, and it can cause unnecessary usage of CPU cycles.
01-07-2014 06:28 AM
The PANFW has the internal logic to determine which traffic is subjected to offloading. The rule of thumb being that any traffic that does not require signature inspection ( for both application determination and threat checks ) is offloaded to the hardware processor. Like mentioned before, sessions for SSL traffic ( which is encrypted and the firewall cannot determine the signature ), application overridden traffic ( admin creates such custom application because he/she trusts such applications ), etc are offloaded.
01-07-2014 05:00 PM
Hello Gregoux,
Threat signature match processing prior to the protocol decoder and the matching engine is used for content/ threat signature pattern matching, If signatures are changed during any transaction, we will mark the FPGA as unavailable, load the new signatures into the FPGA, then unmake it. The user or administrator is not having control on it, whether the traffic will be offloaded or not. It's depending on the traffic pattern only.
Thanks
11-06-2019 09:42 AM
Does anybody know if when I disable the session offload, it disables the offloading for new sessions or also for active sessions?
01-12-2022 09:58 PM
it will only disable offload for new sessions, existing session will not take effect unless clear the existing session
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!