Active / Active Config sync

Reply
Highlighted
Not applicable

Active / Active Config sync

I am setting up a pair of 5020's in an Active / Active configuration.

I am getting confused over the config sync feature and have been overwriting configs on each box.

i.e I configured some aggregate interfaces on Box 1 and then I synced the config on Box 2 which overwrote the config and wiped them out.

I am also in a situation now where the GUI says Running Config not syncronised and if I try to sync it fails, however if I initiate a manual sync it works?

PA-5020-1(active-primary)> request high-availability sync-to-remote running-config

Successfully synchronized running configuration with HA peer

admin@PA-5020-1(active-primary)>

Is anyone running an Active / Active setup.

I just need some basic info on what the best way to drive these boxes is?

Thanks

Roger

Highlighted
Not applicable

This is now working now as I think I just had commited too many changes on different boxes.

However one annoying behaviour is if I put a description on int E1/1 on PA1 then sync the configs it overwrites the description on PA2 e1/1

How do I stop this happening as each interface goes to a different port on the downstream switch

L5 Sessionator

I was able to confirm this behavior in the lab: zones & comments get synced between the 2 devices. This is an expected behavior as the zones & interfaces get synced except for ip addresses in A/A setup. You can refer this document for a list of configs that sync between the peer units: https://live.paloaltonetworks.com/docs/DOC-5086

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!