01-03-2012 03:04 AM
Hi
I have a rule with some custom ports in the service tab, but how do I add ping then? - does not work if I dont have "application-default" in the service tab.
Thanks
01-03-2012 08:26 AM
Hi
custom services can only be used to define udp or tcp ports. As ping is the ICMP protocol it does not use a conventional tcp/udp port, so you will need to set up a separate rule where you can use "application default" services
regards
01-03-2012 08:26 AM
Hi
custom services can only be used to define udp or tcp ports. As ping is the ICMP protocol it does not use a conventional tcp/udp port, so you will need to set up a separate rule where you can use "application default" services
regards
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
