Add QOS for same source but different times & BW

[raji_toor]

We want to have different qos restrictions at different times for a single source ip. traffic from source to destination is over a tunnel. How can i achieve this, i can not assign multple qos profiles to same tunnel interface.

[DonohoeRobert · Accepted solution]

Hi Mate, 

I think the only way ye could do this is with a pbf rule and have two tunnels instead of one. You can assign schedules to pbf rules, send the traffic over one tunnel then according to yer schedule, and the other as needed. 

Then chuck the QoS settings needed on the different tunnels. 

Stand corrected if an easier way 🙂 

best regards

Rob 

[raji_toor]

I would say that's an interesting solution worth considering

[DonohoeRobert · Accepted solution]

Hi Mate, 

As it happens was an easier way. The few screenshots above show a qos policy for on peak and off peak. Only difference is it changes youtube to classification 7 off peak and classification 8 on peak. 

The QoS config has different max for each classification. Tested this an works pretty good. 

Cheers,

Rob