- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
02-23-2014 09:14 PM
Hi All,
After deploying PaloAlto in VWire mode the router getting hanged,.. again after rebooting the router again works fine for hours and again gets hanged (Router have 1G interface).
We have set the negotiation to "Auto" in both PaloAlto and router.. Can any one provide the troubleshooting steps or resolution for this issue.
PANOS is 6.0.0
Model 2050
(as customer says the existing sessions works fine but problem will be with the new sessions ).
Thank you,
Gururaj
Message was edited by: Gururaj Patil
02-23-2014 10:57 PM
Hello Gururaj,
1. Do you have configured any aggregation protocol on your router..?
2. Could you please verify the packet rate on both PAN and the connected router.
3. Please verify the interface of the router, if any L2 error counters increasing rapidly.
Additional info: Re: Limits of VWIRE?
Thanks
02-23-2014 11:24 PM
Hi HULK,
Thank you for reply, there is no link aggregation used in router as well as in PaloAlto
Please let me know,how to check packet rates in PaloAlto?
What is L2 errors?
Thank you,
Gururaj
02-23-2014 11:33 PM
Hi panos,
After rebooting the router everything works fine for few hours and again gets hanged ( the existing sessions works fine but problem will be with the new sessions as customer says).
Symmetric traffic only.
Thank you,
Gururaj
02-24-2014 12:11 AM
Hello Gururaj,
PFB requested commands:
> show running resource-monitor -------- to verify DP CPU, packet buffer and packet descriptor utilization.
> show running logging -------- verify the logging rate on PAN firewall.
> show session info ------ to see packet rate
Procedure to verify interface error ( on both ingress and egress interface):
admin@DADA> show counter interface ethernet1/1
Hardware interface counters read from CPU:
--------------------------------------------------------------------------------
bytes received 1406004
bytes transmitted 36036
packets received 18643
packets transmitted 603
receive errors 0 >>>>>>>>>>>>>>>>>
packets dropped 0 >>>>>>>>>>>>>>>>
--------------------------------------------------------------------------------
Logical interface counters read from CPU:
--------------------------------------------------------------------------------
receive errors 0 >>>>>>>>>>>>>>>>>>>
packets dropped 0 >>>>>>>>>>>>>>
packets dropped by flow state check 0
forwarding errors 0
no route 0
arp not found 0
neighbor not found 0
neighbor info pending 0
mac not found 0
packets routed to different zone 0
land attacks 0
ping-of-death attacks 0
teardrop attacks 0
ip spoof attacks 0
mac spoof attacks 0
ICMP fragment 0
layer2 encapsulated packets 0
layer2 decapsulated packets 0
--------------------------------------------------------------------------------
Thanks
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!