After upgrading the equipment, an ha sync error occurs. device-telemetry: invalid region 'americas'

Showing results for 
Show  only  | Search instead for 
Did you mean: 

After upgrading the equipment, an ha sync error occurs. device-telemetry: invalid region 'americas'

L0 Member
The errors that occur after upgrading the equipment are as follows

Current OS: 10.2.7-h3






We tried to input the region value through the command, but the value was not output.



Community Team Member

Hi @BitoplusCo.Ltd ,


Try checking the tips provided by @aleksandar.astardzhiev in the following post with similar issue:




Did you try to set the region in cli ?

>configue # set deviceconfig system device-telemetry region ***


Can you confirm using the region with CLI:

>show device-telemetry settings | match region

> show system state | match lcaas


Please check the step 4 and confirm you are having the same region:

Enable Device Telemetry:


Hope this helps.


Kind regards,


LIVEcommunity team member, CISSP
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

I entered the command in cli and entered ?, followed by the country.

When the show command is executed
In the photo posted above it appears empty.

Does the account mentioned in the post refer to the Palo Alto CSP account?


  • 2 replies
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!