Aggregate interface per cli

[Shadow]

Dear all,

I am in search of how to create an aggregate interface per cli.

I am using eve-ng and the option to create the ae via the GUI is not available.

much appreciated.

[Metgatz · Accepted solution]

Hello @Shadow 

Example:

set network interface aggregate-ethernet ae1 layer2 lacp enable yes

set network interface ethernet ethernet1/3 aggregate-group ae1

set network interface ethernet ethernet1/4 aggregate-group ae1

set network interface aggregate-ethernet ae1 layer2 units ae1.100 tag 100

set address 192.168.1.1 ip-netmask 192.168.1.1/24set network profiles interface-management-profile Trust https yes

set network profiles interface-management-profile Trust ssh yes

set network profiles interface-management-profile Trust snmp yes

set network profiles interface-management-profile Trust ping yes

set network interface vlan units vlan.100 ip 192.168.1.1

set network interface vlan units vlan.100 interface-management-profile Trustset zone Trust-L3 network layer3 vlan.100

set network virtual-router default interface vlan.100

set network vlan vlan100 virtual-interface interface vlan.100

set network vlan vlan100 interface ae1.100

set import network interface [ ae1 ae1.100 vlan.100 ]commit

[Shadow]

thank you very much, this will help me to create multiple interfaces.